LOCATOR0 pages
Compressed air leak detector
Air leaks are a concern for anyone
operating a compressed air system.
The average plant (with no formal
leak management program) will
have air leaks that waste up to
30 percent of the total air capacity.
Leaks will cause compressors to
run at full load for longer periods
of time. The compressors will not
only use more energy but, may
also need additional maintenance
due to the increased loads.
Leaks can give the false impression that additional compressors are required to meet
the demand for compressed air.
The LOCATOR® supports the reasons for installing zero air loss drains and the
AIR-SAVER® as these two products offer cost reducing features. An AIR-SAVER® is
installed to prevent the air losses caused through pipe line leakages etc.
The LOCATOR® is therefore a natural progression from the installation of an AIR-SAVER®.
The AIR-SAVER® offers air loss prevention - the LOCATOR® offers the air loss detection!
Features:
•
•
•
•
•
•
Ultrasonic air leak detection of compressed air systems
20-100 kHz frequency response
Long distance (approx. 10 meter) audible and visual indication of air leakages
Adjustable detection sensitivity to really locate the leakage area.
Supplied in case, complete with headset, rubber focussing cups and battery
A 9 volt battery included and the LOCATOR includes an automatic battery check
Common leak points:
• Quick connection fittings have o-rings to seal the hose connections. A damaged or
missing o-ring will cause the connection to leak.
• FRL’s (filter, regulation & lubricator).
• The welds found on pipe joints and pipe flanges can leak due to vibrations, age or
improper welding.
• Float or mechanical type condensate drains are also a source of air leaks.
• Pipe thread connections, air tools and many more sources can be the cause of air
leakages.
THE COMPRESSED AIR CONDENSATE MANAGEMENT SPECIALIST
LOCATOR
®
"