TPC-90 pages
/r Dynatec
The Next Level of Technology
TPC-9 Time-Based Pattern Controller
The TPC-9 Pattern Controller from ITW Dynatec, used in conjunction with your hot melt adhesive applicator,
accurately controls glue output for reduced waste and more consistent output. Users can program a custom pat-
tern with up to two glue events or simply choose the economy mode feature that automatically creates a skip
of 30 or 50%. Both utilize adhesive more efficiently while still ensuring a strong bond, and the TPC-9 also gives
you the flexibility to store up to 9 programs of different settings.
TPC-9 Time-Based Pattern Controller
• Available in 24VDC or 120VAC.
• Test mode available for maintenance and/or troubleshooting.
• Simplified "economy" mode feature for skip patterns that reduce adhesive consumption.
o
Performance
Provides accurate adhesive
output for consistent quality.
O
Flexibility
Store up to nine different
program settings for
multiple sized products.
O
Simplicity
Economy mode setting for
simplified "skip" patterns.
TAP TWSfFT BUTTON TO ENTER "EVENT TIMING" MODE
EVENT TIHINGT>*CajSTED WHILE THIS INDICATOR IS LIT
THE LEFT BUTTON STffSsyROUGH DELAY, GLUE1, SKIP & GLUE2
THE RIGHT BUTTON INCREASE^SUNT, FROM 0001 TO 9999 SEC
THE CENTER BUTTON DECREASES THPTIMING FOR EACH FUNCTION
ALL CHANGES ARE MADE "ON THE FLY" AND ARE BACKED UP IN
THE APPROPRIATE PROGRAM MEMORY AFTER STEPPING PAST GLUE 2
PRESS AND HOLD THE LEFT BUTTON TO ENTER "PROGRAM" MODE
THE RIGHT BUTTON SELECTS HIGHER NUMBERED PROGRAMS 11-91
T"" CENTER BUTTON SELECTS LOWER NUMBERED PROGRAMS 11-91
■~ THE LEFT BUTTON TO RUN THE SELECTED PROGRAM
PRESS THE CENitBBJTTON IN RUN MODE TO TEST/PURGE VALVE
PRESS RIGHT BUTTOlSajOGGLE ECONO/STITCH MODE ON AND OFF
ITW Dynatec - TPC-9 Pattern Controller
The Dynatec Difference...
Switch to Stitch and Save
Replace a 6" continuous adhesive bead with a 6" skip
pattern, and you cut adhesive consumption by up to 50%.
It's simple, and the savings are certain. The TPC-9 also
goes the extra mile with a built-in algorithm that always
ends an event with glue when using a stitch pattern so the
edge is never "skipped". Make the switch today and see
the savings for yourself!
"