Dyna-Star® HP and HF 24 VDC Pumps and Accessories0 pages

Dyna-Star® HP and HF 24 VDC Pumps and Accessories
Tech Sheet

Features and Benefits
Safely Move Pump
Built-in lift ring is rated to 500 lbs (226 kg)
Graco Advantage Drive™
High quality helical hardened steel gears are lubricated for life and sealed to keep contaminants out for
longer lasting performance. Field-proven for over ten years to be the longest lasting drive in the industry.
Direct Mount Electric Vent Valve
Mounts directly to pump with no special brackets or hoses for a compact design and less parts to
break or wear out. Deutsch connector is IP69K rated to keep out moisture. Built-in pressure relief for
safety and compact, efficient installations.
Adjustable Motor Control
Ability to adjust motor controls for power input, motor speed, current control and signal input to
perfectly match the pump to your application and environmental changes.
Cavitation-free Fill and Vent Path – Tube-in-Tube
Provides simple and direct venting and filling to the foot of the pump. No cavitation due to improper
filling and venting with no external vent hoses or extra internal pipes. Convert a standard drum to an
injector pump station in minutes.
Auto Fill Shut Off
Avoid over- or under-filling with this cost-effective mechanical solution. Visual indication of a full
reservoir or connect to proximity switch for electronic signal.
AC to DC Converter Box
Convenience of AC power while maintaining DC speed and amp control. Eliminates expensive
pneumatic and hydraulic power requirements.

77X001

Typical Applications
• ining Operations • Milling and Crushing • Heavy-duty Construction • Well Services • Industrial
M

Technical Specifications
Maximum Lubricant Outlet Pressure
HF Models
HP Models

3500 psi (24.1 MPa, 241 bar)
5000 psi (34.47 MPa, 344 bar)

Electrical Requirements
All Models

24 VDC

Input Voltage Range
24 VDC

18 to 32 VDC

Flow Rate Range
HF Models
HP Models

1.5 in3 - 25 in3/minute (24.6 cm3 - 410 cm3/minute)
1.5 in3 - 18 in3/minute (24.6 cm3 - 295 cm3/minute)

Inlet/Outlet Sizes
Tank/Reservoir Fill Port

1/2 in npt

Overflow Port

1/2 in npt

Fluid Outlet Size

3/8 in npt

Operating Temperature
HF Models
HP Models

14° to 149° F (-10° to 65° C)
-40° to 149° F (-40° to 65° C)

77X102

Audible Sound Pressure
71 dB(A)
Product Manuals: Pumps 332514, Pump Systems 332540, Auto Fill Shut Off 332518, Low Level 332515, Electric
Vent Valve 332519, Drum Covers and Follower Plates 312738, Inline Filter 333113, AC to DC Converter 333391

North America Customer Service 800-533-9655 Fax 800-533-9656
©2014 Graco Inc. • P.O. Box 1441 • Minneapolis, MN 55440-1441 • 341047 Rev E • 5/14 • Printed in U.S.A.
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

www.graco.com