pr1300 pages
Gonnheimer
Elektronic GmbH
Ex i- PID Controller
PR130
TUV 02 ATEX 1863
0 Mounting directly in hazardous area
0 Fixed set point, ratio, override controller
0 Continuous or clocked actuator output
0 Local or remote set point entry
0 Split- range control
0 MODBUS- interface
Description_
The PR130 Ex i controller is designed for use in
hazardous areas. The unit can be configured to
operate as a fixed set point, ratio or override con-
troller. The programming functions are organized
at three levels, namely the configuration, parame-
ter and operation data level. Each level can be
locked via a code number.
The actual value input can be adapted to all
common standard signals and for direct connec-
tion of a Pt 100 sensor. In addition, the controller
has an intrinsically safe supply output for connec-
tion of two-wire transducers, thus permitting
practically any physical value to be adapted to the
controller input. The active, intrinsically safe ana-
logue output with separate feeding terminal can
be used for direct control of intrinsically safe ac-
tuators.
When operated as two or three point PWM- con-
troller, this unit in combination with the V1156
supply and interface modules can be used to op-
erate actuators(e.g. heating systems) with max.
250 VAC/ 6A in hazardous areas.
Each standard unit has four free programmable
digital inputs and outputs. The PR130 can now
serve two actuators (split range control) as an
option.
Using the modbus interface option the controller
can communicate with a high level control system
(i.e. DCS). The control system gets the process
variables and can manipulate the control loop
with steering commands.
Type code
PR130
Inputs:
3 x 0/4-20mA.....................
2xO/4-20mA+ 1 xPT100
Serial interface:
without BUS interface..
MODBUS interace .....
.0
.4
Analog outputs:
without analog output 0/4-20mA...................0
one analog output 0/4-20mA........................4
_two analog outputs 0/4-20mA.......................5
Dimensions PR130
D C
"