MKI BWM0 pages

a CLARCOR company

SINTERED WIRE CLOTH LAMINATES

Cross-section

of MKI BWM™

Similar in construction to our

TWM™ five-layer filter

media, BWM™ comprises

five specially chosen weave

types laminated together

offering a unique

combination of clean-ability

and high strength. BWM™

derives its superior

characteristics from the flow

distribution and structural support layers. These

layers are progressively larger aperture plain

square weave meshes. Since their apertures

are significantly greater than the filtration layer,

and they progress in size, the possibility of

particulate entrapment in them is completely

eliminated. Thus, particles finer than the

filtration layer readily pass through

unobstructed.

BWM™ is manufactured to a final thickness of

2.41 mm (0.095"); if a thicker plate is required,

additional layers of support mesh can easily be

added. In addition to being pre-coat compatible,

the barrier-type filtration design means that

contaminants are collected on the surface of

the filter, providing high filtration accuracy and

unsurpassed clean-ability via on- stream

backwashing. Unlike depth-type filtration media

such as sintered powder or fiber (which suffer

internal clogging and reduced permeability),

the long-term reusability of BWM™ media

means lower replacement costs and less

downtime for your process, even in the most

demanding applications.

High strength, high permeability and high

cleaning efficiency make BWM™ an excellent

choice for manual and self-discharging pressure

Nutsche filters, filter tubes used in back-

wash/back-pulse applications, and applications

where fine levels of filtration and low pressure

drops are required.

APPLICATIONS:

• Chemical • Oils

• Pharmaceutical • Water

• Food/Beverage • Steam

• Viscous Liquids • Gases

MARTIN KURZ& CO., INC.

www. m kicorp.com

138 Liberty Ave., Mineola, NY 11501

Phone: (516) 746-7000

Fax: (516) 746-1818

Email: dynapore@mkicorp.com