Overview inclination sensors with CAN/CANopen interfaceSensors0 pages

Overview inclination sensors
with CAN/CANopen interface
Characteristics:
1/2-dimensional inclination sensors
High resolution and accuracy
Comfortable CAN/CANopen interface
High sampling rate and bandwidth
Programmable vibration suppression
– configurable critical frequency (0.3..25 Hz)
Functions CAN:
– Angle request and cyclical output
Figure similarly
– Comfortable setting of parameters
Functions CANopen:
– a TPDO (RTR, cyclic, event-controlled,
– synchronised)
– SYNC Consumer (synchronised transmission of the TPDO after receiving a
– EMCY Producer (exceeding of a limit value,
temperature monitoring in the device)
– Failure monitoring via heartbeat or
nodeguarding / lifeguarding
Figure similarly
optional available as robust, simply mountable aluminium
housing or high impact strength plastic housing
suitable for industrial use:
– Temperature range: -40 °C up to +80 °C
– degree of protection: IP65/67
The inclination sensors are available either with a second connection to a CAN bus (loopthroughed,
socket) or with four freely configurable, potential-free switching outputs and can also be used as
transducer in control systems. The compact and robust design makes the sensor a suitable angle
measurement device in rough surroundings for different applications in industry and automotive
technology. A simple configuration and putting into operation is possible by the standardised CAN­
open interface. All parameters are stored in the internal permanent memory.
Applications:
Industry automation
Agricultural and forestry machines
Utility vehicles
Crane and hoisting technology
GEMAC - Gesellschaft für Mikroelektronikanwendung Chemnitz mbH
Zwickauer Straße 227
D-09116 Chemnitz
Tel: +49 371 3377-0
Fax: +49 371 3377-272
www.gemac-chemnitz.de
info@gemac-chemnitz.de
Sensors
SYNC message)