37 Series Gearbox0 pages
$37 Series Gearbox(037mmXLmm) FASTE@H
innovation Far Changing
-
Note:1, Housing material : Zinc alloy
2'* Backlash,at no-load: ^2°
3> Bearing at output: Sleeve bearings
4, Radial play of shaft: ^0.05rnrn
5, Thrust play shaft: <0.5mrn
6, The gearbox can apply to 52 0,528,545,555,3 85,395,36ZY motors.
7, When the motors using at low speed,high gear ratio will cause
gear mot or torque more than 3 Okgf. cm .At this torque the gears
will be broken easily.Be noted.
8, When install the gear motor please don t let the screws go through
into the gearbox internal morethan 3.5mm. If so the gearbox will
be demaged.
PINION SPECIFICATIONS
Module | 0.4M | 0.4M | 0.5M |
No. of teeth | 13 | 12 | 10 |
Pressure angle | 20° | ||
Helix angle | 15° left | 15° left | |
Hole diameter | ©3.12 | ®3.12,® 1.97 ®2.27,<D2.96 | <D1.98 |
Reduction ratio | 6 | 1 0, 20, 30,60, 90 1 20, 180,270, 489 540, 810 | 489, 81 0, 1 620, 2430 |
"A-Operating relative humidity 20%~85%RH
if Operating temperature range-10°C~+60'C
MOTOR INSTALLATION
Motor\ | ||||
8± 0. 3 (528and 385 motor) 9.7-o:!(545 and 555 motor) |
GEARBOXES SPECIFICATIONS
Raduction ratio | Reduction absolute | Rated tolerance torque | Max breaking torque | Efficiency | Number of stages | Gearbox length "L" mm | Direction (Relationship with motor) |
6,10 | 6/1, 10/1 | 0.5kgf • cm | 1.5kgf • cm | 81% | 2 | 22.5-23.5 | same |
20,30 | 20/1,30/1 | 1.5kgf • cm | 4kgf • cm | 73% | 3 | 22.5-23.5 | different |
60,90 | 60/1 ,90/1 | 3kgf • cm | 8kgf • cm | 65% | 4 | 25-26 | same |
1 20,1 80,270 | 120/1,180/1,270/1 | 1 Okgf < cm | 20kgf- cm | 59% | 5 | 27-28 | different |
360,489 | 360/1,3915/8 | 1 Okgf • cm | 20kgf•cm | 53% | 6 | 29-30 | same |
540,810, | 540/1,810/1 | 1 Okgf • cm | 20kgf•cm | 53% | 6 | 29-30 | same |
1620,2430 | 1620/1 ,2430/1 | 1 Okgf - cm | 20kgf•cm | 48% | 7 | 29-30 | different |
- 12 -
"