Systems Installation Hardware0 pages

Systems Installation Hardware

1. Remove the backing from foam
pads on fixture and discard. Apply
adhesive to fastener base.

Unparalleled design flexibility
Click Bond’s surface mounted systems installation hardware greatly simplifies the
routing of electrical, fuel, hydraulic, and other systems. The use of adhesive to bond
mounting hardware to structure eliminates the fasteners and holes typically required
by conventional bracketry, benefiting structural integrity and manufacturability while
reducing labor and rework costs.

2. Locate fixture on substrate using
a template or by aligning index
marks with drawn centerline. Press
down on outer box to adhere foam
tape to substrate.

Click Bond’s extensive selection of studs, standoffs, nutplate brackets, and cable tie
mounts provides the designer with new options by permitting attachment of systems to
structural members without compromising performance, whether in new designs or in
system retrofit applications.
• Bonded installation reduces galvanic corrosion and fatigue
• Aluminum, stainless steel, titanium, glass / epoxy, carbon / epoxy
and thermoplastic baseplate materials
• Patented disposable fixture maintains consistent bondline pressure
for optimal bond strength and consistency
• Materials compatible with harsh environmental conditions

3. Apply pressure to inner box to actuate
fixture. Plastic springs extrude
adhesive bondline and apply positive
pressure during adhesive cure.

• Complementary high-performance thermoplastic tie wraps and
hardware for cable and clamp attachment
• Metric and unified thread sizes

4. After adhesive has cured, remove
fixture by grasping with pliers and
discard.

Click Bond, Inc.

2 1 5 1 L o c k h e e d W a y, C a r s o n C i t y, N V 8 9 7 0 6 U S A