electromagnetic clutchbrake0 pages

BRITISH

COMPANY

COMPOSITE

CTROMAGNETIC

CLUTCHBRAKE

DATA

SHEET

MODEL

CB 800

This Clutchbrake unit should be used with a Clark Power Unit tvpe 6824/2 or 6824/2R or equivalent circuit.

TORQUE 122 Nm. 90lb.ft. MAXIMUM

UP TO 12 H.P. AT 1440 R.P.M.

CYCLE RATES CAN EXCEED 1500 STARTS/STOPS

PER HOUR WHERE LOAD INERTIA PERMITS

FULLY SELF-ADJUSTING NO MAINTENANCE REQUIRED

CHOISE OF SHAFT DIAMETERS 15/R" or 40 mm

The Clark Composite Clutchbrake unit is a combination assembly of the well proven Clark

model 800 Clutch and Brake. Integral input and output shafts running in substantial sealed

bearings reduce fitting to the ultimate in simplicity and low cost.

The Clutch and Brake torque may be fixed at maximum or preset to a reduced value For

exceptionally smooth starting, the Clark Power Unit type 6824/2R incorporates an

inexpensive "Silkstart" electronic control which raises the clutch voltage from zero to 24V over

a period which can be preset between % second and 10 seconds. "Boost" circuits can provide

very high acceleration and stopping rates i.e. for high cycle rate indexing drives

Comprehensive applications advice from address overleaf.