Serie 35 - Process Analysers0 pages

Measurement
and Control

35 series
The 35 series developed by
Chemitec is dedicated to the
water treatment and industry
sectors, and enables the
following parameters to be
measured:

Process control device

4pH/REDOX
4Dissolved oxygen

1 analogue output

4Conductivity

4Programmable for measurement.

4Chlorine

4 The limits of the outputs are freely programmable within the
measuring range.

4Chlorine dioxide
4Ozone

4 digital outputs
4ON/OFF set point: programming the operating range
(hysteresis/direction) and start/stop time 000 to 999 seconds.

Alarm
4Programmable for: tool faults, minimum, maximum, set point
delay, stay time (live check).
4Delay time: 00:00 to 59:99 mm:ss with a minimum interval
of 15 sec.
4Stay time 00:00 to 99:99 hh:mm
4Set point deactivation (in case of alarm):
Enabling/Disabling.
Wall-mounted version with IP66 protection
rating (144 x 144 x 120 mm)

Washing electrodes
4Programming the interval (minimum 15 min) and the
duration.
4During washing, all the analogue and digital outputs are
frozen.

Digital input
4To disable the doses.

RS485 serial port
Panel-mounted version
(144 x 144 x 100 mm)

4For set-up and remote real time acquisition.

Manual controls
4Possibility to simulate the analogue and digital outputs from
the keypad.

Temperature compensation
4Using PT100 sensor with 3 or 4 wires, or PT 1000.
Panel-mounted version
(96 x 96 x 133 mm)