RT9510

0–90° to 0–50 Turns • 0...5, 0...10 Vdc
Industrial Grade Rotational Position Sensor
Absolute Rotary Position up to 50 turns
Aluminum or Stainless Steel Enclosure Options
IP68 / NEMA 6

GENERAL
Full Stroke Range Optionst

0-0.25 to 0-50 turns

Output Signal Optionst

0...5, 0...10 Vdc

Accuracyt

see ordering information

Repeatabilityt

± 0.05% full stroke

Resolutiont

essentially infinite

Enclosure Material Optionst powder-painted aluminum or stainless steel
Sensort

plastic-hybrid precision potentiometer

Potentiometer Cycle Life t
Shaft Loadingt

see ordering information
up to 35 lbs. radial and 5 lbs. axial

Weight, Aluminum (Stainless Steel) Enclosuret

3 lbs. (6 lbs.) max.

ELECTRICAL
Input Voltaget

14.5-40 VDC (10.5-40 VDC for 0...5 volt output)

Input Currentt

10 mA max.

Output Impedancet

1000 ohms

Maximum Loadt

5000 ohms.

Zero Adjustmentt

from factory set zero to 50% of full stroke range

Span Adjustmentt

4.5” [114 mm]

2.4” [59 mm]

The RT9510 is an incredibly simple device which provides
a regulated 0...10 VDC rotational-position feedback signal
with a 14.5...40 VDC unregulated input voltage.
This innovative sensor from Celesco, designed to meet
tough NEMA-4 and IP67 environmental standards, is available in full-stroke measurement ranges of 1/4 to 50 turns.
Because the sensor is potentiometric, the RT9510 is absolute and will maintain position information even after a loss
of power.

to 50% of factory set span

Output Signal:

ENVIRONMENTAL
Enclosuret

NEMA 4/4X/6, IP 67/68

Operating Temperaturet
Vibrationt

-40° to 200°F (-40° to 90°C)
up to 10 g to 2000 Hz maximum

0...10 Vdc*

EMC COMPLIENCE PER DIRECTIVE 89/336/EEC
Emission/Immunityt

EN50081-2/EN50082-2

(0% fs.)

(100% fs.)

*Optional 0...5 Vdc output signal available.

20630 Plummer Street  •  Chatsworth, CA 91311
tel: 800.423.5483 • +1.818.701.2750 • fax: +1.818.701.2799
celesco.com • info@celesco.com

RT9510  | 1