Centrifugal_Sieve0 pages

Centrifugal Sieve
DMHX.
Application
The DMHX centrifugal sieve has been designed for
control sifting of semi-finished and end products and for
separating foreign material, husks and lumps from mealy
or granular products. It is applied in the feed, pet food,
and oilseed processing industries as well as in related
processes.
Operating principle
The material is directed through the front-end inlet duct
to the screen jacket. While gradually conveying the
material toward the outlet, the rotor hurls the product
against the screen jacket. As a result, small product
lumps are detached. Brushes attached to the rotor clean
the screen, which improves the separating efficiency. In
order to support screen cleaning and to increase the
throughput capacity, the machine must be aspirated.
Design versions
The centrifugal sieve is available in two different sizes, as
DMHX-2 and DMHX-4. The machine is powered by a
For control sifting
and screening of
semi-finished and
end products.
shaft-mounted gearmotor. Depending on the specific
application, perforated metal screens or wire mesh
screens in different sizes can be used.
In addition, the following machine options are available:
– Aspiration system
– Product inlet
– Product outlet
Customer benefits
–tHigh operator safety thanks to key transfer system
–tEasy cleaning and access thanks to quick-action t
t locks on side doors and screens
–tSanitary design with round edges and smooth tt
tsurfaces