Actuator Type MN0 pages
VETEC Actuator - Type MN (rotary or diaphragm actuator)
MN200, MN300
Sizes:
Version:
- Diaphragm or
- Rotary actuator
Travel:
- 40 / 52 mm
Opening angle:
- 75°
Spring position:
- Centrally arranged spring
Diaphragm area:
-
330 to 735 cm²
Spring torques:
-
33 to 146 Nm
Supply air range:
- 3 to 4 bar
Ambient temperature range:
- –20 to 80 °C / –4°F to 176 °F
Mounting of accessories:
- VDI/VDE 3845
Fig. 1: Type MN Actuator
Principle of operation:
The Type MN Actuator is equipped with a diaphragm and a centrally arranged return spring on
the inside. The freely supported piston rod is
directly connected to the lever for the valve shaft.
The short travel ensures very short actuating
times. In addition, the actuator is designed for
very fine and precise control.
The actuator can be equipped with additional
manual gears as well as end stops.
Fig. 2: Sectional drawing of Type MN Actuator
TY 005.009
VETEC Ventiltechnik GmbH
Telefon: 06232 64120
Rev. 05
Siemensstraße 12
Telefax: 06232 42479
D-67346 Speyer
Internet: www.vetec.de
Seite 1 von 2
Abt.:
Konstruktion- Entwicklung