عضویت 
ورود اعضا
راهنمای خرید
F-1000 Molded Fittings0 pages
Blue-White
R
Industries, Ltd.
DigiFlo Digital Paddlewheel Meters
Engineering and Technical Data
F-1000
Molded In-line Fitting
Three Model Variations:
Rate of flow display
Total flow display
Rate & Total display
Features:
!
!
!
!
High accuracy digital paddlewheel technology.
3/8”, 1/2”, 3/4”, 1”, 1-1/2”, and 2” male pipe threads.
Flow rate from .4 to 200 GPM
Tamper proof factory programming.
!
!
!
!
Easy to read 6 digit LCD display, up to 4 decimal places.
Battery operated (2 AAA batteries included).
Very low pressure drop.
Total reset function can be disabled.
Specifications:
Max. working pressure: ........300 PSI (20 bar) @ 70o F (21o C)
Max. fluid temperature: ........200o F (93o C) @ 0 PSI
Max. ambient temperature: ..14o to 110o F/ -10o to 43o C
Full scale accuracy: ..............+/- 2%
Power requirement: ..............2 AAA batteries (included)
Enclosure: .............................NEMA 4X (IP56)
Maximum pressure drop: .....8 PSI (varies per model)
Approximate shipping wt: ...2 lb. (.91 kg)
Materials of Construction:
Pipe fitting: ............................Polypropylene (options: PVDF)
Sensor, paddlewheel, axle: ..PVDF
Sensor O-ring seals: .............Vitonq (optional EP)
Enclosure: .............................ABS
Installation Requirements:
Minimum Straight Pipe Length Requirements
®
BLUE-WHITE INDUSTRIES
GALLONS PER MINUTE
Rate - Totalizer
Minimum Outlet Pipe Length
10 X Pipe I.D.
5 X Pipe I.D.
Reducer
15 X Pipe I.D.
90 Elbow
20 X Pipe I.D.
40 X Pipe I.D.
5 X Pipe I.D.
Pump Or Gate Valves
50 X Pipe I.D.
5 X Pipe I.D.
®
F-1000-RT
GALLONS PER MINUTE
5 X Pipe I.D.
Two Elbows -2 Directions
BLUE-WHITE INDUSTRIES
5 X Pipe I.D.
25 X Pipe I.D.
MINIMUM
OUTPUT
LENGTH
5 X Pipe I.D.
Two Elbows -1 Direction
I.D.
MINIMUM
INPUT
LENGTH
o
Recommended
Vertical
45° Acceptable
45° Acceptable
I.D.
Minimum Inlet Pipe Length
Flange
FLOW
MINIMUM
OUTPUT
LENGTH
MINIMUM
INPUT
LENGTH
FLOW
Type Of Disturbance
F-1000-RT
Horizontal Mount
Rate - Totalizer
The meter’s accuracy is affected by disturbances such as pumps,
elbows, tees, valves, etc., in the flow stream. Install the meter in a
straight run of pipe as far as possible from any disturbances. The
distance required for accuracy will depend on the type of disturbance.
Angle Mount on Horizontal Pipe
Vertical Mount
Mounting location
!
!
!
The meter is designed to withstand outdoor conditions. A cool, dry location, where the unit can be easily serviced is recommended.
The meter can be mounted on horizontal or vertical runs of pipe. Mounting at the vertical (twelve o'clock) position on horizontal pipe is
recommended. Mounting anywhere around the diameter of vertical pipe is acceptable, however, the pipe must be completely full of water
at all times. Back pressure is essential on downward flows. See the minimum straight length of pipe requirement chart above.
The meter can accurately measure flow from either direction.
