Xebec Diamond0 pages

"

L XEBEC Diamond Lineup A

nnnn

1. Stick type

nnnn

Grit (color)	Dimensions (mm)	Code No.
#200	1 X 4 X100	DM1004M
	1 X 6 X100	DM1006M
(black)	1 X10X100	DM1010M

nnnn

	1 X 4 X100	DF1004M
#400 (bluegreen)	1 X 6 X100	DF1006M
	1 X10X100	DF1010M

nnnn

#800 (gray)	1 X 4 X100	DS1004M
	1 X 6X100	DS1006M
	1 X10X100	DS1010M

nnnn

2. Rod type

nnnn

Grit (color)	Dimensions(mm)	Code No.
#400 (bluegreen)	^3X 50	PDF30S
	^3X100	PDF30M

nnnn

• Usage

nnnn

♦ Ideal for polishing extremely hard die and mold

nnnn

(especially materials harder than HRC57).

nnnn

♦Usage can be specified for:

nnnn

o Surface polishing

nnnn

0 Finishing ribs after EDM

nnnn

o Finishing gates after EDM

nnnn

o Finishing and deburring in corners

nnnn

o Finishing and deburring in edges

nnnn

o Chamfering corners

nnnn

(to be rounded or chamfered)

nnnn

(§>For the Most Efficient Use...

nnnn

♦Coolant

nnnn

o The XEBEC Diamond can be used either dry or wet.

nnnn

o Coolant will increase efficiency.

nnnn

♦Forming (Shaping the tip of a tool in accordance with the shape of a workpiece.) / Dressing

nnnn

<Stick type>

nnnn

o For easy and perfect forming / dressing, use an electrodeposited diamond stone. Do cutting

nnnn

same way.

nnnn

<Rod type>

nnnn

o For easy and perfect forming / dressing, press a tool rotating in a hand grinder onto an

nnnn

electrodeposited diamond stone. Do cutting same way.

nnnn

Precautions in use:

nnnn

♦When Using with an ultrasonic tool

nnnn

o Please check the appropriate output. The tool may break or generate heat when the output is too large.

nnnn

o Please check the appropriate length. On an inappropriate length, the tool may not oscillate, or concentrated

nnnn

output may result in heat generation.

nnnn

oA bad clamp may concentrate output, resulting in heat generation.

nnnn

o Polishing capabilities may vary depending on the structure and method of the clamp in use; please read

nnnn

carefully the instructions of your supersonic tool.

nnnn

♦When Using with a hand grinder

nnnn

c Ptease use below the maximum 30,000rpm.

nnnn

0 Please use below 50mm full length. (If full length is more than 50mm, make sure to cut it below 50mm.)

nnnn

♦Others

nnnn

o Please wear protective eyeglasses, gloves and mask during use.

nnnn

/l\ Warning Please always follow the above instruction

nnnn

/ • \ ■*9rmng ancj precautions in order to use the tools s

nnnn

safely.

nnnn

liillili

nnnn

tp://www.xebec-tech.

nnnn

XEBEC

nnnn

XEBEC TECHNOLOGY CO.,LTD.

nnnn

Head Office 4-3-3 Koujimachi, Chiyoda-ku, Tokyo, Japan

nnnn

Phone.+81-3-3239-3481 FAX.+81-3-5211-8964

nnnn

URL http://www.xebec-tech.co.jp

nnnn

E-mail info@xebec-tech.co.jp

nnnn

your order:

nnnn

Factory and R/D

nnnn

4061-1 Minami-Minowa-mura, Kamiina-gun, Nagano, Japan

nnnn

Phone.+81 -265-73-1523 FAX.+81 -265-73-0375

"