sand casting process0 pages
v^xeljet
Large-format sand molds for metal casting
• Mold measurements up to 4 x 2 x 1 m
• Does away with elaborate and expensive mold set-ups
• Short throughput time (a few days)
• Sand molds correspond 1 :1 with CAD model
• Structures can be designed in accordance with
requirements, without having to watch for draft angles
or undercuts
• Special sands prevent casting problems
Surface quality can be adjusted through use of different
sands
Coarse-grained sands for high gas permeability
Considerable flexibility with changes in geometry,
without additional expenses
No storage or maintenance of patterns
Cost savings particularly for complex molds and batch
sizes of 1 to several hundred pieces
Sand casting process
CAD model
2. Sand mold
3. Integrated gating system 4. Embedding of sand mold
' ^^^^^^^^ |
5. Aluminum pouring
6. Demolding
8. Cooling
9. Lost sand mold
1 0. Casting including gating
system
Finished casting
1 2. Casting with sand mold
voxeljetAG Paul-Lenz-Slraf3e la 86316 Friedberg Germany
Tel +49 821-7483-100 Fax +49 321-7483-1 1 1 info@voxelje1.com www.voxeljet.com
Americas EMEA AsiaPacific
"