عضویت 
ورود اعضا
راهنمای خرید
Car Bottom Specifications 0 pages
Q-Cells_CELLS_Flyer_2011-03_Rev01_DE.pdf table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:11.00pt "Franklin Gothic Medium", sans-serif; } .font1 { font:17.00pt "Franklin Gothic Medium", sans-serif; } .font2 { font:9.00pt "Impact", sans-serif; } .font3 { font:16.00pt "Impact", sans-serif; } HCB-2EQ Sries Horizontal Car Bottom Vacuum Furnace Features and Benefits Front and rear hinged autoclave-type doors for loading / unloading from both ends of the furnace 镕 Work zone sizes: Width x Height x Depth: 54" W x 54" H x 144" D 50,000 pound capacity 54" W x 54" H x 288" D 100,000 pound capacity 54" W x 54" H x 432" D 150,000 pound capacity 80" W x 80" H x 432" D 150,000 pound capacity Other sizes available as required Uniformity of ± 10°F throughout hot zone Օ Super energy efficient graphite insulation hot zone for high temperature applications up to 2500°F Thin segmented graphite resistance heating elements for uniform radiant heat up and cool down Օ Dual* high performance external gas quenching systems provide high velocity, 2 bar cooling of large work loads Front and rear transfer cars provide safe, powered loading / unloading of car bottoms and work loads Օ Fully automated and programmable industrial controls package Designed for long life, easy maintenance, minimal downtime, and low cost of operation (*Single quench system for 144" deep furnace model) Specifications The HCB-2EQ model is a horizontal car bottom vacuum heat treating furnace specifically designed for large, heavy work loads. It is a high temperature, high vacuum, batch-type furnace with electric resistance heating elements both in the circular hot zone and the full length of the car bottoms. Hot Zone Օ Operating temperature: 2500°F Maximum temperature: 2650°F Օ Temperature uniformity: approximately ±10°F Hearth: molybdenum pins and graphite rails Օ Heating elements: Thin, curved, segmented graphite heating elements in the circular hot zone Thin, flat, segmented graphite heating elements along the full length of the car bottoms Insulation: Four (4) layers of 0.5" thick high purity graphite felt surround the circular hot zone Six (6) layers of 0.5" thick high purity graphite felt mounted on the front and rear doors and car bottoms Օ Hot Face: 0.040" (5mm) thick Flex Shield carbon fiber reinforced graphite foil sheet Five (5) zones of trim control Օ Insulation and heating elements are mounted on a heavy duty, stainless steel support structure Vacuum Chamber Double wall, water cooled, horizontal vacuum chamber has front and rear hinged doors with pneumatically operated autoclave-type locking rings to permit the furnace to safely quench at positive pressures up to 15 PSIG (2 bar). Oversized water inlets and outlets assure maximum water flow.
"
