عضویت 
ورود اعضا
راهنمای خرید
LPV 8020 pages
LPV 802
Length portioning device for sausages in natural casings
Identical length, identical weight, identical calibre VEMAG LPV 802 length portioning device for natural
casings.
The VEMAG LPV 802 length portioning device breaks
completely new ground in length portioning. For the rst
time, requirements for identical length, identical weight and
identical calibre for sausages in natural casings can all be
satised at once. The high reproducibility of results achieves
a degree of standardisation which used to appear possible
only for sausages in articial casings.
The device patented is designed as an attachment which is
compatible with all the lling machines in the current range
which keeps the investment cost required to a minimum.
Linking sausages in sheep and hog casings
The LPV 802 length portioning device
is a special casing holding device
for automatically linking sausages
in natural casings so that they are
identical in length, weight and calibre.
Use
The length portioning device is suitable
for cooked and raw sausage in sheep
and hog casings. In contrast to other
length portioning systems, speciallysorted casings are not required. Instead,
any standard assortment of casings
and any overlapping casings can be
used without problems. The sausage
is guided through a special calibrating
horn during lling, with the result that
the specied lling calibre is always
achieved, so that not only casings of
the nominal calibre but also casings of
a larger calibre can be processed. This
results in considerable cost benets.
Even with normal assortments, the
risk of split casings is signicantly
reduced. If a breakage does occur, it
is no longer necessary to interrupt
production; the casing does not tear off
in the device, and any product residues
in the device can be rinsed out by the
operator using the integrated rinsing
device. The rinsing device also ensures
that the lling table is always clean.
Handling
Applications
No special set-up work is required to
connect the device to the ller. The
length portioning device is attached
to the linker plate of the ller like an
ordinary casing holding device and
the water supply is quickly connected
using a rapid-release coupling. The
length portioning device has no
drive of its own and is thus wear
and maintenance-free. The operator
can adjust it to different calibres and
lengths in just a few moves. Even
adapting the casing tension required
does not involve protracted adjustment
work. No other manual intervention is
required during production itself, which
is why even an untrained operator can
work with the device immediately. All
the settings can always be reproduced,
clearly improving the standardisation
of products.
The LPV 802 length portioning device
can be connected to the following
lling machines:
• ROBOT 500
• ROBBY / ROBBY-2
• ROBOT HP-series
• ROBOT DP-series
The device allows the production of
sausages ranging in calibre from 15 to
42 mm.
All the benets at a glance
• Designed as an attachment –
a simple, cost-effective solution
• Easiest handling imaginable
• Little training required
• Use of casings of variable quality
• Reduction in casing breakage
• High reproducibility of results
• Minimisation of sorting
requirement when packing product
www.vemag.de
"
