5077 Power Calibrator Data Sheet0 pages

Time Electronics

5077 Power Calibrator

PC Virtual
Control

• 1mV to 1050V AC/DC
• 0.02 to 22A AC/DC
• 0 to 22kVA or 0 to 22kW
• Phase angle ± 90°
• Power factor 0.00 to 1.00
• 100A AC current transformer option
• 45 to 400Hz in 0.1Hz steps
• Clamp meter adaptor option
• RS232/GPIB/USB interface
• Virtual control software supplied

DESCRIPTION
A high accuracy AC and DC power calibrator suitable for calibrating watt-meters, power meters, and
kW-Hr meters. Supplied with its own “Virtual Control” software allowing the user full control via laptop or PC.
Frequency can be set in 0.1Hz steps from 45 to 400Hz, and phase in 0.1-degree steps. Alternatively power
factor (PF) can be set in 0.01 steps. The output can be displayed as VA or Watts.
The standard maximum AC current output (22A) can be extended to 100A by using an optional 100A
current transformer. This extends the maximum power to 0.1MW/MVA. A clamp meter adaptor option is also
available (1 and 50 turns).

CALIBRATION MADE EASY
The 5077 can also be controlled using Time Electronics’
EasyCal software. This provides increased speed of calibration
and consistency of results.
Easily produce calibration certificates and reports to ISO 9001,
ISO 17025, and other international quality standards.

www.timeelectronics.com