DS203 Serial Device Server0 pages

Features
10/100BaseT Ethernet port
One RS232 port
Compact (60x47x30mm)
Wide supply voltage (10-25V)

About
The DS203 is a serial device server that can be used to quickly network-enable virtually any serial device or
system. Compared to the original DS100 converter, the DS203 is smaller, faster, and has a larger memory.
The DS203 is offered with Tibbo Device Server Toolkit software, which includes Virtual Serial Port Driver
for Windows and Linux.
This product can also be supplied (loaded) with TiOS rmware and work as a simple BASIC-programmable
controller.

Specifications
▪
▪
▪
▪
▪
▪
▪

10/100BaseT, auto-MDIX Ethernet port.
One RS232 serial port (TX, RX, RTS, CTS, DTR,
DSR).
Two status LEDs on the RJ45 jack.
Two Ethernet status LEDs on top of the device.
Power: 10-24V (12V nominal).
Dimensions: 60x47x30mm.
Firmware is upgradeable through the serial port or
network.

▪

Optional accessories:
▪ DMK1000 DIN rail mounting kit.
▪ 12V/0.5A adaptor: APR-P0011 (US), APR-P0012
(EU), APR-P0013 (UK).
▪ WAS-1499 straight Ethernet cable (for this
device can be used as crossover cable too).
▪ WAS-P0004(B) DB9M-to-DB9F serial cable
(device-to-PC).
▪ WAS-P0005(B) DB9F-to-DB9F serial cable
(device-to-device).

▪
▪

Remote control of RTS, CTS, DTR, and DSR lines.
“On-the-y” commands for immediate serial port
conguration.
Serial-side “modem” commands for network
connections control.
Direct control of ADSL modems.
Supports UDP, TCP, ARP, ICMP (ping), DHCP,
PPPoE, LCP.

Serial-over-IP Firmware
▪
▪
▪
▪
▪
▪

Full- and half-duplex serial port modes.
Server, client, and server/client network (“routing”)
modes.
8KB data buffers (one in each direction).
Conguration stored in the EEPROM.
Detailed status indication status indication via
LEDs.
Setup through the serial port or network (UDP,
Telnet).

▪
▪
▪

continued on next page