Roller Hearth Furnaces0 pages

Thermo Transfer Inc.
1601 Miller Avenue,
Shelbyville, Indiana 46176 US
Phone:317.398.3503 • Fax:317.398.3548
E-Mail: info@thermotransferinc.com • Web site:www.thermotransferinc.com
Roller Hearth Furnaces
Roller Hearth Furnaces
The roller hearth furnace conveys the work directly on the hearth rollers. Work can also be processed in baskets or on trays which are conveyed on the rollers. Quench
systems and cooling systems can also be provided.
Furnaces can be designed for use with or without atmosphere. Heating systems can be direct open fired, indirect fuel fired or electrically heated. Furnaces can be lined
with refractory or with ceramic fiber depending on the application. furnaces. The high temperature consistency and low energy consumption of these furnaces, normally
gas-fired, ensure reproducible quality and short treatment times.
The processes used for heat treating non-alloyed and alloyed carbon steel pipes at temperatures around 2200° F include carbonitriding, carburizing, stress relieving,
hardening, normalizing, recrystallizing, normalizing, sintering, soft annealing and spheroidizing in indirectly fired continuous roller hearth furnaces.
For the spheroidizing of pipes made from high-carbon ball bearing steels, we can design into the process vestibules to completely isolate the furnace atmosphere from
the surrounding air are essential, at least at the furnace entry. Vestibules are also needed at the entry and exit of continuous roller hearth furnaces for the bright
solution annealing of high-alloy austenitic pipes.
In the heat treatment of copper alloy bars and pipes, zinc, which can be easily oxidized, is the critical element in the alloy. Rapid cooling is essential to ensure that the
zinc is kept in solution. This can be achieved using optional high convection cooling chambers with hydrogen atmosphere.
Contact us by selecting the “Request for Information” button, phone or fax anytime to find out why at Thermo Transfer Inc., your satisfaction is our most valued asset.
SPECIFICATIONS
Overall Furnace Dimensions: 10" W x 11-1/2' H x 400' L (Maximum - Length Based on Specific Requirements)
Chamber Sizes:
Based on Operating Temperature and product being processed in pounds per hour.
Contact Sales for system requirements for your product needs.
Operating Temperature Ranges: 2,200° F
Heat Source:
Electric
Natural Gas
Propane Gas
Other
Heat Capacity Ranges:
Depending upon the design of the furnace required,
the unit could handle up to 10,000 or higher pounds/hour Production Capacity
Contact Sales for system requirements for your product needs.
Recirculation Blowers:
The HP and CFM are based on Chamber Size and Fuel Source, along with the load the furnace has been
designed to process.
Contact Sales for system requirements for your product needs.
12/9/2010 | Page 1 of 1