77 Prewired 5, 8, 12-Zone Mold Junction Box for Hot Runner Wiring0 pages

9408 Ath HotRunner:Layout 1

12/17/08

12:06 PM

Page 29

Prewired 5, 8, 12-Zone Mold Junction Box for
Hot Runner Wiring
Athena Prewired Mold Junction Boxes feature an
innovative design that makes hot runner wiring fast,
easy, and logical. Boxes contain a 25-pin power
connector for 15 AMP/240 zones, and a 10, 16 or 24
pin thermocouple connector.
Each Box:

▲ Is Completely Assembled
▲ Prewired with Marked Zones
▲ Contains Terminal Strips for Accurate Wiring
Athena’s Prewired Hot Runner Mold Wiring System has
quickly developed recognition as the new industry
standard. Changeovers are quick and logical, and
troubleshooting can be done while the mold is still
in the press.

Dimensions

Here’s how simple it is! There are two terminal strips–one
for power and the other for thermocouple connection.
10.420

Simply:
3.300

1. Bring the wires from the mold through the wire opening
2. Place the wires under the SEMS pressure plate on the
appropriate zone number

Cover - Top View

3. Tighten the screw
4. Repeat on the other side
3.300

Cover - Side View

It’s Really that Easy!

9.000

1.500

5. Replace the cover

2.500 3.125

5.500

.282 (4 Places)
10.155
Mold Mounting Footprint

Ordering Information

P T B
Description
C = Combination
T = Thermocouple
P = Power

# Zones
005 = 5 Zones
008 = 8 Zones
012 = 12 Zones

Market
A = Domestic
or Export
E = CE

Options
Code
000

77