Dual, 200mA, Low-Iq, Low-Dropout Regulator for Portable Devices (Rev. A)0 pages
OUT1
OUT2
GND
6
5
4
EN1
IN
EN2
1
2
3
TLV710
TLV711
1.5mm x 1.5mm SON-6
(TOP VIEW)
IN
EN1
EN2
GND
OUT1
OUT2
ON
OFF ON
OFF
V
IN
C
IN
C
1 F
Ceramic
m
OUT1
C
OUT2
1 F
Ceramic
m
V
OUT1
V
OUT2
TLV710 Series
TLV711 Series
www.ti.com SBVS142A –JULY 2010–REVISED AUGUST 2010
Dual, 200mA, Low-IQ
Low-Dropout Regulator for Portable Devices
1FEATURES DESCRIPTION
2• Very Low Dropout: The TLV710 and TLV711 series of dual, low-dropout
– 150mV at IOUT = 200mA and VOUT = 2.8V (LDO) linear regulators are low quiescent current
– 75mV at I devices with excellent line and load transient OUT = 100mA and VOUT = 2.8V
performance. These LDOs are designed for
– 40mV at IOUT = 50mA and VOUT = 2.8V power-sensitive applications. These devices provide
• 2% Accuracy Over Temperature a typical accuracy of 2% over temperature.
• Low IQ of 35mA per Regulator The TLV711 series provides an active pulldown
• Multiple Fixed Output Voltage Combinations circuit to quickly discharge the outputs.
Possible from 1.2V to 4.8V In addition, the TLV711-D series of devices have
• High PSRR: 70dB at 1kHz pull-down resistors at the EN pins. This design helps
• Stable with Effective Capacitance of 0.1mF(1) in disabling the device when the signal-driving EN
pins are in a weak, indeterminate state (for example, • Over-Current and Thermal Protection the GPIO of a processor that might be three-stated
• Dedicated VREF for Each Output Minimizes during startup). The pull-down resistor pulls the
Crosstalk voltage to the EN pins down to 0V, thus disabling the
• Available in 1.5mm × 1.5mm SON-6 Package device.
(1) See the Input and Output Capacitor Requirements in the The TLV710 and TLV711 series are available in a
Application Information section 1.5mm x 1.5mm SON-6 package, and are ideal for
handheld applications.
APPLICATIONS
• Wireless Handsets, Smart Phones, PDAs
• MP3 Players and Other Handheld Products
Typical Application Circuit
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Copyright © 2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.