CoolPoint vortex flow meter for water or corrosives CoolPointMed with IS (3/4 - 2 inch)0 pages

U
N
I
V
E
R
S
A
L
Maximum flow ranges fromt
Max pressuret
Temperature range t
®
F L O W
25-200 GPM (95-750 LPM)
300 PSI (20 Bar)
32-210°F (2-99°C)
CP 3/4-2 inch
CoolPoint
™
M O N I T O R S
UNIVERSAL
Flow Monitors
®
Vortex
Shedding
Flowmeter
CoolPoint™ with
Rotatable Enclosure
option
Description
User-Configurable Options
Features that are selectable on the 3 wire standard
4-20 mA units include:
•t Selectable alarm state (N.O. or N.C.)
•t Set point or pulse output
•t Engineering units (GPM, LPM)
This flowmeter is made for water, water/glycol coolant of
low viscosity fluids. There are no moving parts to clog or
wear. They are certified CSA and CE. They have a 4-20
mA output. There are two versions. The three wire version
(power supplied separate from the 4-20) has a solid state
relay that can be configured as an alarm or as a pulse out.
It has a bright LED digital display of flow rate.
The two wire version (option E14) has no display, pulse
out or alarm point. It can be operated in an intrinsically
safe mode only when used in conjunction with an approved intrinsic safety barrier meeting required entity
parameters.
Instrument Specifications
•t Flow
t Visual readout: 3 digit LED, 0.3" digit height.
t Deadband for Alarm: 5% of full scale (maximum
flow) 3 wire units only.
t Accuracy: ±2% of full scale (maximum flow).
t Repeatability: ±.25% of indicated flow.
t Turndown (ratio of max to minimum flow rates):
10:1 at all temperatures and 20:1 available
optionally for standard temperatures.
•t Pressure
t 300 PSIG (20 Bar) operating pressure
•t Response time
t 450 ms.
•t General
t Fluid temperature limits: 35-150° F (2-66° C)
standard, 150-210° F (66-99° C) optional 3 wire
units only.
Enclosure rating: IP 65, Type 1, 3, 4, 12 and 13
•t Pipe Connections:
t Female NPT, BSPP & BSPT
•t Back pressure of 10 PSIG required
Electrical Specifications
•t Input Power: 10 - 30 VDC @ 80 mA standard, 25 mA
for the 2 wire option
•t Output: 4-20mA for flow
•t 100 pulses per gallon from the solid state relay for
3 wire (standard) option – all units except the 2 inch
CP16 which is 25 pulses per gallon
•t Electrical Connection
Pin Connector (standard)
Pigtails (optional)
Junction Box with terminal strip (optional)
Material Specifications
Flow bodies of brass or 316 Stainless Steel with PVDF
sensors and Viton® seals standard. PEEK sensors used
for high temp for fluids above 150° F.
Viton® is a registered trademark for DuPont Performance Elastomers.
CP-CNMed091412 t
1t