SSW0 pages

Miniature Flush Diaphragm Pressure Transducer
Model SSW
• All-welded 17-4 PH Stainless Steel Assembly
• 3/8– 24 UNF Thread
• 0-100 PSI to 0-10,000 PSI
• Bonded Strain Gages
• Liquid or Gas Media

Specifications
Pressure Ranges

0-100 psig through 0-10,000 PSI

Non-linearity & Hysteresis

+/- 1.0 % FS

Non-Repeatability

+/-0.1 % FS

Sensitivity / Output

2 millivolts / Volt

Resolution

Infinite

Overload Pressure

150% Range

Temperature, Operating

-65°F to +250°F

Temperature, Compensated

70°F to 170°F

Temperature Effect, Zero

0.01% FS/°F

Temperature Effect, Span

0.02% Reading/°F

Strain Gages Type
Excitation(Calibrated)

5.0 Vdc

Excitation(acceptable)

7 Vdc Maximum

Bridge Insulation Resistance

>5000 megohms

Bridge Resistance

350 Ω

Shunt Calibrated Data

Data Supplied -excitation & -output

Wiring Code

Red + excitation, Black – excitation, White + output, Green output

Mating connector

N/A

Media

Liquid or Gas compatible with 17-4PH Stainless Steel

Weight

<2 ounces

Installation Torque

300 in-lb Maximum

5 Ft twisted color coded TFE insulated wires...with a small in-line circuit board 24 inches from sensor

www.semsorwerks.com | Phone: (614) 481-8616 | Fax: (614) 481-2393 | 1145 B Chesapeake Avenue Columbus, Ohio 43212