Molybdate Duo Meter0 pages
Palintest
nnnnLeaders in Water Analysis Technology
nnnnMOLYBDATE
nnnnDUO
nnnnThe Molybdate-Duo Meter provides a single meter
nnnncapable of measuring tracer levels of Molybdate as low
nnnnas O.IOppm, with a range of 0.0 to 20.0 ppm and a high
nnnnrange for measuring levels of 0 to 100 ppm as Mo04.
nnnnFormulations containing Sodium Molybdate are used
nnnnas corrosion inhibitors in industrial water treatment. In
nnnnparticular, Molybdate finds application in cooling towers
nnnnand in closed recirculating systems such as hot water
nnnnheating and chilled water systems. Molybdates have
nnnnreplaced toxic corrosion inhibitors such as Chromates.
nnnnWhen using Molybdate treatment, it is necessary to
nnnncontrol the Molybdate concentration within specified levels
nnnndepending on the application involved.
nnnnMolybdates are used extensively for corrosion inhibition
nnnnand also as a tracer reagent in many boiler and cooling
nnnnwater products. Low levels of Molybdate are mixed in with
nnnnthe products for the determination of product levels in a
nnnnsystem i.e. a 1.5 to 2.0 ppm level may indicate 100 ppm of
nnnnproduct.
nnnnThe Molybdate-Duo is suitable for bench use in
nnnnlaboratories or for field use by sampling engineers or
nnnncontractors. The Molybdate-Duo Meter is supplied in a soft
nnnncarry pouch with a belt loop for maximum portability, or
nnnnwith an optional hard carry case for added convenience.
nnnnThe kit comes complete with test tubes, reagents and full
nnnnoperating instructions.
nnnnThe Palintest Molybdate-Duo is supplied with a test
nnnncertificate confirming conformance to calibration
nnnnstandards. Certified check standards are available as an
nnnnoptional extra.
nnnnORDERING INFORMATION
nnnnPT 183 Molybdate-Duo in soft carry pouch
nnnnPT 184 Check Standards with Test Certificate
nnnnPM 258 Molybdate LR Reagents starter pack
nnnn(50 tests)
nnnnPM 175 Molybdate HR Reagents starter pack
nnnn(50 tests)
nnnnAP 258 Molybdate LR Reagents replacement pack
nnnn(250 tests)
nnnnAP 175 Molybdate HR Reagents replacement pack
nnnn(250 tests)
nnnnTechnical Specifications
nnnnInstrument Type Pulsed LED colorimeter pre-programmed
nnnnfor direct reading
nnnnOptics Integral focused optics with pulsed blue
nnnnLED
nnnnOperation Two button
nnnnRanges 0.0 - 20.0 ppm (using LR reagents) and
nnnn0-100 ppm (using HR reagents) as Mo04
nnnnBlank/Zero Optionally held in memory or reset for
nnnnsetting each reading
nnnnInternal Factory set 5-point calibration -
nnnncalibration recalibration through internal software
nnnnInstrument case Splash proof case with membrane keypad
nnnnTemp range 0 to 50°C
nnnnPower supply 2 x 1.5v batteries (included). Power
nnnnmanagement system with automatic
nnnnswitch-off
nnnnBattery life Approximately 20,000 readings
nnnnSize Pocket sized: 173 x 75/44 x 41 mm
nnnnPalintest Ltd
nnnnPalintest House, Kingsway, Team Valley.
nnnnGateshead, Tyne & Wear, NE11 0NS,
nnnnEngland
nnnnTel: +44 (0) 191 491 0808
nnnnFax: +44 (0) 191 482 5372
nnnnEmail: sales@palintest.com
nnnnWebsite: www.palintest.com
nnnnPalintest USA
nnnn21 Kenton Lands Road, Erlanger.
nnnnKentucky 41018, USA
nnnnTel: (859) 341 7423 Toll Free: 800 835
nnnn9629
nnnnFax: (859) 341 2106
nnnnEmail: into@palintestusa.com
nnnnWebsite: www.palintestusa.com
nnnnPalintest Asia Pacific
nnnn1/53 Lorraine Street
nnnnPeakhurst Business Centre
nnnnPeakhurst NSW 2210, Australia
nnnnTel: 1300 131516 Fax: 1300 13198C
nnnnEmail: palintest@palintest.com.au
nnnnWebsite: www.palintest.com.au
nnnnThe information in this leaflet is believed to be correct but is given without warranty or engagement. Specifications are subject to change without n
nnnnPalintest China
nnnnRoom 1601, KunTai International
nnnnMansion, 12BChaoYang District
nnnnBeijing, 100020, PRC
nnnnTel: +86-10 5126 1868 - 809
nnnnFax: +86-10 58790155
nnnnE.mail - tred.tan@palintest.com
nnnnWebsite - www.palintest.cn
nnnnA HALMA COMPANY
nnnn'.. Illustrations are for style only. Individual products may differ from those illustrated.
"