process air heater0 pages

PROCESS AIR
HEATER SETS
Benefits include:
•
•

Heatpack 18

Up to 18kW

•

Heatpack 36

Up to 36kW

The fan and heater are mounted on to a
base-frame with hose connectors for the
outlet (and inlet on recirculating systems).
Braked castors and an adjustable height
handle can be fitted if required to produce a
mobile unit.

Flexible Performance

•

•

Safe Operation

•

Up to 9kW

Compact and Portable

•

Heatpack 9

Energy Saving

•

•

Clean, Dry, Hot Air

•

Three units are available and are selected by
the heat output required.

Accurate Temperature Control

•

SECOMAK offer a range of packaged process
air heater sets. These are complete and
ready-to-install systems of fan, electric air
heater and temperature control.

Ease of installation

Conforms to CE, EMC and Low
Voltage Regulations

Controls consist of a digital set point
controller with temperature readout. All or
part of the element load is switched using
solid
state
relays
to
give
accurate
temperature control. Start and stop buttons
are provided and also prevent the heater
being operated without the fan.
An Over Temperature sensor monitors
system performance and shuts down the unit
if the temperature rises above a pre-set
level. The controls are mounted in a sheet
steel IP54 lockable enclosure fitted with an
isolator. This can be mounted to the
base-frame, wall or other suitable structure.
These units have been designed to conform
to CE, EMC and Low Voltage regulations.
Other combinations of fan and heater would
be considered as would variations to the
control
specification,
such
as
period
run-timers, air flow sensors and remote start
and stop.
The facility to communicate via a computer
can also be provided.

Secomak Ltd. 330 Centennial Park, Elstree, Hertfordshire, WD6 3TJ, UK
Phone: +44 (0) 208 7321 300 Fax: +44 (0) 208 7321 301
E-mail: sales@secomak.com
Web: www.secomak.com