TL120 pages
TL12-Track Loader
iai<eucHi
Those in the know, know Takeuchi
OPERATING PERFORMANCE
Operating Weight Standard Machine with Bucket
Canopy 11,618 lbs (5,270 kg)
Cab 11,850 lbs (5,375 kg)
Tipping Load 8,102 lbs (3,675 kg)
Rated Operating Capacity, SAE J818* 2,833 lbs (1,285 kg)
Operating Load at 50% of Tipping Load 4,051 lbs (1,838 kg)
Operating Capacity w/ Opt Counterweight 3,263 lbs (1,480 kg)
Bucket Breakout Force 8,670 lbs (3,932 kg)
Lift Arm Breakout Force 8,550 lbs (3,877 kg)
Traction Force 13,766 lbs (6,244 kg)
Capacity SAE Heaped (Optional Bucket) 24.0 cu ft (.068 m3)
Cycle Time:
Raise Full Load 4.6 Seconds
Lower No Load 2.8 Seconds
Dump Full Load 3.1 Seconds
Curl No Load 2.3 Seconds
•Operating capacity of compact track loaders is rated according to SAE
J818 at no more than 35% of the tipping load
ENGINE
Make / Model
Cylinders / Displacement
Horsepower Gross (SAE J1995)
Horsepower Net (ISO 14396)
Rated / Maximum Engine Speed
Maximum Torque
Engine Lubrication
Cooling System
Fuel Tank Capacity
Fuel Consumption, 65% of full load
Electrical System
Kubota/V3800CR-Turbo Intercooled
4/230 cu in (3.8 L)
110.0 hp (82.0 Kw)
108.4 hp (80.8 Kw)
2,400 rpm/2,600 rpm
277 ft-lb (375 Nm)
13.9 qt (13.2 L)
17.4 qt (16.5 L)
23.8 gal (90.0 L)
3.70 gal/hr (14.0 L/hr)
12 volts/80 amps
UNDERCARRIAGE
Traction Drive Type
Parking Brake
Track Roller Type
Track Rollers
Track Width
Ground Pressure:
Canopy
Cab
Maximum Travel Speed:
Low
High
HYDRAULIC
Hydraulic Reservoir Capacity <
Hydraulic System Capacity
Auxiliary Flow - Primary Circuit
Auxiliary Flow - Optional High Flow
Auxiliary Flow - Optional 2nd Circuit
Hydraulic System Pressure
Hydrostatic w/ Double Reduction
Planetary Final Drive
Spring Applied, Hydraulically Released
Permanently Sealed Rollers
6 per side
17.7 in (450 mm)
4.6 psi (32.0 kPa)
4.7 psi (32.6 kPa)
4.9 mph (7.9 km/hr)
7.4 mph (11.9 km/hr)
15.9 gal (60.0 L)
25.1 gal (95.0 L)
23 gal/min (88.0 L/min)
40 gal/min (153.0 L/min)
17 gal/min (64.5 L/min)
3,046 psi (21.0 MPa)
—i-:-'-<-r"i—
WORKING DIMENSIONS
A. Overall Operating Height
B. Maximum Lift Height to Bucket Pin
C. Dump Height Fully Raised
D. Dump Reach Fully Raised
E. Clearance Circle with Bucket
F. Clearance Circle w/o Bucket
G. Clearance Circle, Rear
H. Maximum Bucket Rollback at Ground
J. Maximum Dump Angle Fully Raised
13 ft 11.2 in (4,247 mm)
10 ft 6.1 in (3,203 mm)
7 ft 11.7 in (2,432 mm)
3 ft 2.8 in (986 mm)
7 ft 11.8 in (2,434 mm)
5 ft 1.4 in (1,559 mm)
5 ft 9.1 in (1,788 mm)
31.4°
38.7°
"