Cartridge Type Piezo Pump SDMP320C0 pages

PIEZOELECTRIC MICRO PUMP

(Under Development)

Cartridge Type Piezo Pump
SDMP320C

Patent Pending

Can be easily replaced for each fluid
Features
A built-in magnet enables the pump cartridge to be easily removed
from and attached to an actuator with a piezoelectric element.
Sterilisation of the pump cartridge prior to use is possible.
No metal is used as wetted materials.
Self-priming is possible.
Flow rate is adjustable by changing drive voltage or drive frequency.
Small-sized, lightweight and slim.
Low noise and low power consumption.
Use the QR code on the right or the link below to
see the movie “How to use”
https://youtu.be/0XMQHMF_qu8

Specifications

(Target Values)

Model Number

SDMP320C

Pump Type

Piezoelectric Diaphragm Pump

Typical Flow Rate

20 ml/min

Typical Pump Pressure

20 kPa

Drive Voltage

60 to 250 Vp-p

Drive Frequency

10 to 60 Hz

Typical Suction Load
Pressure

-1.0 kPa

Operating Temp.

5 to 50 °C

Wetted Materials

COC (Cyclic Olefin Copolymer)
EPDM (Ethylene Propylene Diene Monomer)

External Dimensions

33 x 33 x 6.9 mm

Weight

Approx. 13 g

Input / Output Pipes

φ1.8-φ2.8-L5.0 mm

The data above are based on sine wave drive. Flow rate and pump pressure are larger if driven
by Takasago Standard wave.

Note: Details including specifications may change without notification.
2015.06

TAKASAGO ELECTRIC, INC.
66 KAKITSUBATA, NARUMI-CHO, MIDORI-KU, NAGOYA, 458-8522 JAPAN
Tel +81-52-891-2301
Fax+81-52-891-7386
E-mail: info@takasago-elec.co.jp URL: http://www.takasago-fluidics.com/