PRO-NGA Stainless steel pumps with open impeller0 pages

PRO-NGA
Stainless steel pumps with open impeller
PERFORMANCE RANGE
INSTALLATION AND USE
•
•
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The open impeller design allows liquids containing relatively
high levels of impurities to be pumped without the risk of the impeller clogging. All of the components in contact with the pumped
liquid are constructed in stainless steel AISI 316. As a result of these
characteristics the PRO-NGA series pumps find specific use in assemblies for washing fruit, vegetables, fish and shellfish, in industrial assemblies for washing metallic objects and glass containers,
as well as for the circulation of cooling liquids.
The pump should be installed in an enclosed environment, or at
least sheltered from inclement weather.
Flow rate up to 350 l/min (21 m³/h)
Head up to 20 m
APPLICATION LIMITS
•
•
•
•
•
•
Manometric suction lift up to 7 m
Liquid temperature between -10 °C and +90 °C
Ambient temperature between -10 °C and +40 °C
Max. working pressure 6 bar
Passage of suspended solids up to Ø 10 mm
Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
OPTIONALS AVAILABLE ON REQUEST
EN 60034-1
IEC 60034-1
CEI 2-3
•
•
CERTIFICATIONS
GUARANTEE
Special mechanical seal
Other voltages or 60 Hz frequency
2 years subject to terms and conditions
70