Electrically operated ball valve fitted with a J3 electric actuator.0 pages

Electric Brass Ball Valve
Type: J3-1100E/ 1110E/ 1120E
Available with actuator function:

POWER OPEN - POWER CLOSE

FAILSAFE

MODULATING

FAILSAFE MODULATING

Type: 1100E

Type: 1110E

Type: 1120E

Electric actuator direct mounted

Electric actuator fitted via kit

Actuator fitted via TSM stem extension

Main J3 Smart electric actuator features:

Specifications:

LED light for continual visual actuator status feedback.

Actuator housing

UV Protected Polyamide

Fully weatherproof smart industrial actuator, CE marked.

IP Rating

IP65 (J3) or IP67 (J3C)

Multi-voltage capable actuator , EU manufactured by J+J.

Actuator temp limits

-20 to +70°C

All external electrical connections, no need to remove cover .

Assembly temp limits

J3-1100E +70°C
J3-1110E +120°C

Selectable manual override facility.

J3-1120E +100C

Thermostatic anti-condensation heater.

End of travel switches for remote open/ closed indication.

Valve body

Nickel plated brass

Valve ball

Chrome plated brass

Valve seats

PTFE

Valve Pressure rating

Electronic torque limiter.

UTI 1” 40 bar at ambient temp

Applications:

To 21/2” 30 bar at ambient temp

Water, oil, air and most non-corrosive media, subject to compatibility with wetted parts in contact with media. Not for use on potable
water & NOT recommended for use on steam.

3”

Valve actuators sized on a maximum differential pressure of 10 bar
wet service, operated at least once per day. If the intended duty
differs from these parameters, or is dry (air or gas), please call to
check actuator sizing as a larger output valve actuator may be required.
Maximum working temperature of a direct mounted assembly is
+70C. For higher working temperatures , consider models that have
a mounting kit or TSM stem extension between the valve and the
smart electric valve actuator which uses air cooling to dissipate the
rising heat from the ball valve away from the actuator. Should the J3
smart actuator see more than +70C it will malfunction.

25 bar at ambient temp

Valve temp limits

-20 to +120°C

Size range

1/4” to 3”

How this electric 1/4 turn valve works (on-off):
Electrically operated valves are driven by a motor and gearbox.
On receipt of a continuous voltage signal the motor runs and,
via a gearbox in the J+J smart electric actuator, rotates the
valve stem. The motor stops at the desired position (usually 0°
or 90°) by internal cams striking micro-switches. The smart
valve actuator remains in this position, with the voltage still
applied continuously, until switched and a continuous voltage
reversing signal is applied, which runs the motor in the oppo-

Ball valve information:

Kv Values

Full bore 2 piece construction, providing full unrestricted flow
and a very low pressure drop across the valve. Designed for automation with integrally cast ISO5211 actuator mounting
platform. Turning the ball through 90° fully opens the valve,
turning back through 90° fully closes the valve and isolates the
flow. End connections are threaded BSP female.

Size

Uncontrolled copy, not subject to automatic updates.

1/2”

1”

16.3

Kv

3/4”
29.5

43

11/4” 11/2”
89

230

2”

21/2”

3”

265

540

873

3

Kv = m per hour with a 1 bar pressure drop across the valve
CV = US gallons per hour with a 1psi pressure drop across the valve
Cv = Kv / 0.86

Doc: J3-1100ERev0 Oct 2014