IBC SLX 8200 pages

tr.row {}
td.cell {}
div.block {}
div.paragraph {}
.font0 { font:5.00pt "Arial", sans-serif; }
.font1 { font:10.00pt "Arial", sans-serif; }
.font2 { font:10.50pt "Arial", sans-serif; }
.font3 { font:18.00pt "Arial", sans-serif; }
.font4 { font:10.00pt "Sylfaen", serif; }
.font5 { font:4.00pt "Tahoma", sans-serif; }
.font6 { font:5.00pt "Tahoma", sans-serif; }
.font7 { font:7.00pt "Tahoma", sans-serif; }
.font8 { font:16.00pt "Tahoma", sans-serif; }
.font9 { font:29.00pt "Tahoma", sans-serif; }
820 litres, IBC SLX 820
IBC 10 A-V
4 IBC SLX 820 is intended to contain products with a maximum density of 1.9, except with the interstackable wooden pallet where maximum density is 1.4
v IBC SLX 820 is suitable for storage, handling and transportation of chemicals products, foodstuffs. IBC SLX 820 optimizes, storage, handling, and transportation of your products compared to other packaging. v IBC SLX 820 is fitted with a 820 litres high density polyethylene (HDPE) bottle made by extrusion blow moulding, a valve screwed into the bottom outlet, a pallet and a protective wire cage. Standard bottle colour, translucent.
MARKING PLATE
Standard (width ; 331, height ; 390 mm) Large (width ; 667, height ; 390 mm)
Galvanised steel
ManuLogos
BOTTLE CAP
0 150mm or 0 220mm
Colour
Black
Manufacturing process
injection moulding
Raw material
HDPE
Closing torques
- 0 150, 50 / 70 Nm
- 0 220, 80 / 100Nm
Remarks
- Balance vent, degas / regas vent, or quick emptying system are with protective cap.
- Tamper evident system available.
Raw material
Remarks
Standard version one in the front, additional marking plates are optional. UN version, standard or large plate in the front and in the back of the IBC, additional plates are optional.
Front plate with traceability and UN label. Bar code type EAN 13 available.
PROTECTIVE WIRE CAGE
Welded steel wire mesh
Manufacturing process
Automatic welding Silver grey
CORNERS PROTECTORS
Colour
Only for UN IBC Black
Colour
Raw material
HDPE
Remarks
Anti corrosion treatment, coated with epoxy polyester.
optional protective gate HDPE
Manufacturing process
injection moulding
BOTTOM OUTLET
Raw material
2" butterfly valve HDPE
Manufactured date of the bottle and, assembly date of the IBC. HDPE, SOTRALENTZ Emballage.
Colors
white or black
Manufacturing process
injection moulding
injection moulding
PALLET
Metal
Plastic
Wood
Rackable, stackable, interstackable.
yes
yes
it depend the model
Perimetric
yes
No
No
No-perimetric
No
yes
yes
Raw material
Galvanised steel
HDPE
Wood
Manufacturing process
stamped and welded
injection moulding
assembly
Remarks
Wooden pallet, heat treatment IPPC 15 available.
Mשtal pallet
Interstackable ^^^^^5 wooden pallet
Remarks
Butterfly valve components :
Triple security on the valve, red security pin on the lever, aluminium/PE tamper evident seal welded to valve outlet and end cap with seal. Valve seals, EPDM or VITON, in case of doubt please contact us. Serial number on the valve body. 3" inch valve available, please consult us.
SOTRALENTZ Packaging valves brochure, available on : www.sotralentz.com
4 Approval(s) :
v For land, sea or air transport of dangerous liquids of packing group II or III, for products with a density not greater than 1.9.
v In accordance with UN recommendations and the derivative modal regulations : RID/ADR, IMDG code.
4 Nominal capacity :
v 820 litres (-0 +6%),(total brimful capacity, 845 litres).
4 Recommended maximum stacking for filled IBC's :
(B) : interstackable wooden pallet. (A) : other pallets.
Maximum stacking with a plastic pallet : 2 on 1 if density product less than (<) 1.4 1 on 1 if density product greater than (>) 1.4
4 Weights and dimensions, in mm :
FRONT
SIDES
TOP
Weights depend, of the pallet 3 kg)
Dimensions (+/- 10 mm)
Metal Plastic Wood
Length Width Height
59,0 kg 64,0 kg 60,0 kg
1200 mm 1000 mm 980 mm
4 Quantitשs livres par types de transports :
1 in dynamic load
If density product is: greater than (>) 1.4 (A) greater than (>) 1.2 (b)
1 on 1 in dynamic load
If density product is : less than (<) 1.4 (A) less than (<) 1.2 (b)
2 on 1 (B et A) or 3 on 1 (A) in static load
On a perfect flat ground 2 on 1 if density product greater than (>) 1.4 3 on 1 if density product less than (<) 1.4
1
Transport
120 m3 truck
70m3 truck
ISO 40" container
ISO 20" container
Quantity
90 IBC's
32 IBC's
44 IBC's
20 IBC's
SDTRALENTZ
EMBALLAGE