"LM1-EPDM
Food Quality Hose Application: A flexible suction and discharge hose for use in
breweries and the food and beverage industries. Suitable for use with alcohol (max. 40%) and soft
drinks, fatty (max. 36%) and non-fatty foods. Temperature range: -35C / +95аC. Steam cleaning
up to max. 130C / 30 min, unpressurised. Feature: White EPDM food quality tube with high temperature resistance. Safety factor: 3.15 : 1 Tube: EPDM, white, smooth, food quality. Tasteless, odourless, kink resistant, sturdy, very light. Reinforcement: Textile wrapped. Standard/approval: Cover: SBR/NR/EPDM, red, abrasion resistant, ozone
and weather resistant, cloth impression. BfR (former BgVV) XXI:2002 (Kat. 2), WeihenЭ
stephan, FDA (CFR 21 177.2600). Marking: Continuous transfer tape, white:
"SEMPERIT S LM1-EPDM Brewer/Kellermeister D PN
12 bar". Notice: Very high resistance to many aggressive cleaning
agents. For the application of cleaning agents please see
our separate information sheet. ATTENTION: Not suitable for dry conveyance. Vacuum resistance; up to 50mm ID -0.5 bar; 65mm ID/75mm ID -0.4 bar, 80mm ID -0.3 bar, 100mm ID -0.2bar >
Article number Internal-ǘ in Wall width External- Work. pressure Number of Bending radius Weight Coil length mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m 48256 1350 13,0 1/2 5,0 23,0 12 2 50 0,40 40 48256 1950 19,0 3/4 5,0 29,0 12 2 100 0,55 40 48256 2560 25,0 1 6,0 37,0 12 2 150 0,85 40 48256 3280 32,0 1 1/4 8,0 48,0 12 4 170 1,45 40 48256 3890 38,0 1 1/2 9,0 56,0 12 4 200 1,85 40 48256 4010 40,0 10,0 60,0 12 4 250 2,25 40 48256 5011 50,0 11,0 72,0 12 4 350 2,95 40 48256 6011 60,0 11,0 82,0 12 4 420 3,55 40 48256 6512 65,0 12,0 89,0 12 4 450 4,05 40 56256 7515 75,0 15,0 105,0 12 6 600 6,10 40 56256 8015 80,0 15,0 110,0 12 6 650 6,40 40 56256 0015 100,0 15,0 130,0 12 6 750 7,75 40 >
Please note: General information about our range of products can be found in the appendixto this catalogue. Before using with new or untested media, or before using in applicationsthat are not covered in the product information, written advice must first be obtained from aspecialist dealer or a Semperit application engineer. All products must be inspected regularlyfor operational safety. For safety reasons, hoses must be replaced in the event of damage, esحpecially if the cover is damaged. All products must be stored and maintained according toour storage, care and maintenance instructions, and according to DIN 7716:1982.We are constantly developing and improving our products for our customers. For the latestproduct information, please visit our website www.semperflex.com regularly or contact one ofour specialist dealers or Semperit application engineers. Contracts are agreed according toour general terms and conditions. Subject to change without notice. Important notice: This catalogue has been prepared with the greatest care in order to provideyou with all the information you need. The information contained herein incorporates the lateststate-of-the-art technology, and is the result of trials and tests carried out over many years, orconforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005(E). The individual conditions of use affect the use of each product. They therefore only ensurethe safety that can be expected assuming that the specifications in our written product information, the specifications regarding resistance to chemicals and our cleaning procedures are allcomplied with. We cannot guarantee this level of safety in the event of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specifiedotherwise, all hoses are manufactured to EN ISO 1307:2006. Date: 31.08.2007 size="-2">
"
عضویت 
ورود اعضا
راهنمای خرید
