PA 11 Series0 pages
PHOTOELECTRIC AMPLIFIER SERIES
PA 11
Description
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
ᔢ
Operation mode and max sensing range:
Thru-beam: 0-70 m
Diffuse proximity: 0-5 m
230 V ac, 115 V ac, 24 V ac or 24 V dc
supply voltage
Manual sensitivity adjustment
Sensor LED-drive
Automatic sensor test
Adjustable on/off time delay
1 relay and transistor output or 2 transistor outputs
Switch selectable light or dark function
Switch selectable long or short range
Power, output, sensor test and signal level
indicators
11-pole DIN socket connection
The PA 11 is a 1-channel photoelectric amplifier, which is to be used in
The microprocessor controlled sensor test ensures that the system
conjunction with a set of remote transmitter LT and receiver LR from the
will automatically detect and indicate a faulty transmitter or receiver –
series 100, 110 and 120.
cable break or electrical failure – during operation, through the relevant
This amplifier series offers manual sensitivity adjustment via integral
potentiometers located on the front panel of the amplifier. Output can be
selected from either a relay and NPN or NPN and PNP transistor outputs
LED located on the front panel. The sensor LED drive powers the
optional monitor LEDs available on the remote sensors – output (LT)
and power (LR).
with or without a 0-10 sec on/off time delay. Light or dark function and
long or short range are switch selectable.
Technical Data
Supply voltage
24 V dc, 24 V ac, 115 V ac or 230 V ac
Voltage tolerance
+/– 15 %
Current consumption
Output
Max. 3,5 VA
Relay
1 open / 1 close, 250 V ac / 3 A, 120 V ac / 5 A
Transistor
60 mA / 30 V dc
Alarm output
–
Power on indicator
Green LED
Output indicator
Yellow LED
Signal level indicator
Green LED
LR sensor failure indicator
Red LED
LT sensor failure indicator
Red LED
Sensor monitor LED drive
The green monitor LED on the receiver indicates ‘Power ON’
The yellow monitor LED on the transmitter indicates ‘PA 11 output activated’
Hysteresis
Approx. 45 %
Response time tON / tOFF
Delay tON / tOFF
Relay
14 Hz
Transistor
Operation frequency
20 Hz
Relay
35 ms / 35 ms
Transistor
25 ms / 25 ms
PA 11 A
0-10 sec, adjustable
Housing material
Noryl
Environmental Data
Temperature, operation
–10 to +50 ºC
Temperature, storage
–40 to +80 ºC
Sealing class
IP 40
a
Approvals
WWW.TELCOSENSORS.COM
REMOTE PHOTOELECTRIC SYSTEMS
I 27
"