F202 Donut Loadcell0 pages

F202
Donut Loadcell
Standard Ranges 10, 25, 50, 100 and 200kN (1 to 20tonnef)

♦ Hardened stainless steel body
♦ Sealed to IP65
♦ Very high structural load limit
♦ Tensile applications are ‘fail-safe’
♦ Traceable calibration with certificate
included in the standard price
♦ Standard 2 year warranty

Geometry: Axial strain cylinder in weather sealed case, with raised end load bearing faces
and hole right through. For use in compression or in fail-safe tensile applications.
The F202 is ideally suited to engineering force measurements including through centre
safety testing of cables, rods and bolts.
It is designed for easy installation, usually between two flat faces bearing on its loading
rings, either unattached or with retaining spigots positioned in the centre hole. Alternatively
tensile load transfer can be achieved via a tie rod assembly through the centre hole. In this
way the loadcell can indirectly measure tensile loads in a “fail-safe” mode.
A load button and base plate are available for the F202.
We are happy to design variants of this loadcell to meet your specific requirements.
Versions can be manufactured for fully compensated operation up to +250°C. Please
consult our engineering department.
Details of our other loadcell families can be found in the Product List and the Loadcell
Specifier Guide. If you require copies please contact our sales department or look on our
web site at www.novatechloadcells.co.uk.
Ordering Codes: See the loadcell ordering code sheet for more details. Add range in the required units.
F202CFR0K0

Compression, IP65, unrationalised

F202CFR0KN

Compression, IP65, rationalised