Mise en page 1 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:8.00pt "Arial", sans-serif; } .font4 { font:10.00pt "Arial", sans-serif; } .font5 { font:11.00pt "Arial", sans-serif; } .font6 { font:13.00pt "Arial", sans-serif; } .font7 { font:15.60pt "Arial", sans-serif; } .font8 { font:17.00pt "Arial", sans-serif; } Breathing Air Compressors Portable COMP-3 Breathing Air Compressor System H-10-5 BB30-CO3 The Twin-Airٙ Compressor system is designed to provide Grade-D breathing air to 3 workers wearing pressure demand respirators. The TA-3 has twin ASME receiver tanks that act as the mounting frame for the compressor. The use of the receiver tanks provides air that has been cooled to within 1 0 degrees of the ambient temperature. We've added pneumatic tires for ease of mobility in rough terrain and a bottom skid plate for going up and down stairs. This plate becomes the frame for the addition of a reserve air cylinder on the model TA-3EA. This compressor is not designed for use with constant flow respirators or Vortex cooling tubes. Designed for use with Pressure Demand Respirators Only TA-3 Compressor Specifications  Rotary vane air compressor rated for continuous duty Օ Pressure range to 110 psi output  2 HP electric motor, 1 750 rpm continuous duty - thermally protected Օ 1 1 5/230 VAC, 1-phase, 60Hz, 1 7.2 amps (Requires 20 amp service)  Low maintenance - 500 hours between oil changes Օ 10" pneumatic tires  50,000 hour minimum vane life Օ Built-in skid plate for stair climbing  USDA approved food grade oil in compression end Օ Automatic pressure unloading - full modulation air control  Breather Boxՙ Grade-D filtration package required  Noise level below 70 dbA at 3 feet Օ 8 Gallon Twin-AirTM tank assembly, 8.5 cf air storage @ 110 psi, ASME coded  1/2" 5000 series Hansen style coupling on air outlet Օ Optional explosion-proof motor (230/3 VAC only), MODEL TA-3EXP, see page 1 8  Dimensions: 46" L x 24" W x 22" H Օ Weight: 1 50 lbs Did KNOW? All compressors MUST be placed in a clean air environment per OSHA 1910.134 Model No. Description TA-3 COMP-3 3BK-2C 3BK-1C BB3C-FK Twin-Air Compressor, 115/23C VAC, 1 phase, 2HP, 20amp Package system includes: Model TA-3 compressor, H-10-5 (1 /2" x 10') connect hose, and BB30-CO3 Breather Boxٙ filtration package, 3 respirator fittings Calibration kit for CO monitor - 20 ppm CO, zero air, regulator and case - 17 liter size disposable cylinders Calibration kit - same as above with 10ppm CO gas for Canadian calibration Replacement filter kit COMP-1TM Breathing Air Compressor System Designed for use with Two Pressure Demand Respirators Only The TA-1 compressor has been designed to operate 1 or 2 pressure demand airline respirators. Grade-D filtration must be provided in the form of a 1 or 2 worker Breather Box. The TA-1 uses a 11 5/230 VAC 60Hz electrical supply. Model TA-3G uses a gasoline engine for mobile operations. USDA food grade oil is used in the compressor air end. Model No. Description TA-1 Electric compressor,1-2 worker, 115 VAC TA-3G Gasoline compressor, 1-2 worker with remote intake snorkel Note: Grade-D filtration and hoses ordered separately or available in packages below COMP-1 Grade-D compressor package includes: TA-1 compressor, BB15-CO Breather BoxTM, H-25-3 connect hose COMP-2 Same as COMP-1 with the addition of Model BB15-CO2, 2-outlet Breather BoxTM This compressor is not designed for use with constant flow respirators or Vortex cooling tubes. BB15-CO 1 7 1-800-866-8100 ٕ www.airsystems.com