PLASTAL0 pages

MACHINE TOOLS
MACHINE SPECIFICATIONS
SAWING HEAD
TCT blade 500 Ø (not supplied).
15 HP motor - 3ph. 415 V + neutral.
Cutting length 1050; 2050 or 3050 mm
Blade rotation speed : 60 m/s.
Transmission by POLY V-belt.
Pneumatic-atomised lubrification.
Retraction by pneumatic jack at end of cut ( electrical jack on option ).
Height of cut adjustable between 0 and 150 mm. (solid panel thickness 120 mm ).
Pneumatic retraction of the blade ( adjustable by the control panel on option).
PLASTAL 515
PANEL SAWING MACHINE
CONSTRUCTOR
SUPPORT
Treated roller guidance system on strong section prismatic ground rails 63 HRC
Adjustable automatic advance between 0 and 6 m/min through electronic variator.
Rack and pinion drive system.
TABLE
Large size fitted with roller balls.
Width 800 mm upwards.
Total width 1 000 mm.
Height of work surface : 1 000 mm.
Work surface fitted with ball bearings spaced at 200 mm.
Load : 450 kg/m²
CLAMPING
Pneumatic presser.
Clamping stroke: 150 mm.
Clamping on both sides of the blade (the presser acting as protective shroud).
Anti-tilting device by synchronization of the both pneumatic jacks.
Elastic band for stress distribution.
SAFETY
Security carriage following the blade to prevent user access.
C.E conformity.
EQUIPMENTS
Control console containing control units, ammeter.
Operator zone protected.
MACHINE TOOLS
CONSTRUCTOR
ROTY & FILS
41, rue J. Cartier
LA VILLE ES NONAIS
35430 CHATEAUNEUF
FRANCE
Tél : 33 2 99 58 36 71
Fax : 33 2 99 58 37 77
PANEL SAW FOR CUTTING OF HEAVY PLATES
OF ALL DIMENSIONS AND LARGE SECTION
IN ALUMINIUM, OTHER NON FERROUS METALS
AND COMPOSITES MATERIALS
THE MOST ECONOMIC PANEL SAW,
GARANTEE FOR ACCURATE CUTTING TOGETHER
WITH A FAST, SAFE AND PRODUCTIVE OPERATION