Wiper and Brushes0 pages

WIPERS AND BRUSHES
•t Resistant to oils, coolants and hot shavings
•t Resistant to wear caused by friction produced during scraping
•t Wiper profile has durable flexibility
Profiled Wipers for Guides
These consist of a Stainless steel housing to protect from shavings, and an inner profile of Polyurethane.
!
always
indicate
this
measurement
!
!
always
always
indicate
indicate
! this
this
measurement!
measurement!
guide guide plane
plane
Example of flange mount
Example of guide mount
Possible method of fastening to guide
For work environments with a heavy concentration of sharp shavings
Built to drawings in any shape or size
Solve the problem of small quantities since no expensive molds are used
Polyurethane profile resists abrasion and is easily replaced
We must have a drawing with measurements showing the profile of the guides on which they are
to be mounted
Pre-loading is determined by our engineering department based on the shape of the wiper
The wiper measurements refer to free position without pre-load and it is ALWAYS necessary
to indicate the distance measurement between fastening bore and guide plane to weap
For fastening, we recommend counter-sunk hex screws
4,6
25
11
14
14
8,5
9,5
FB 25
4,6
18
FB 18
4,6
21
FB 14
18
•t
•t
•t
•t
•t
•t
•t
•t
10
Reproduction of this page is strictly prohibited.
always indicate
this measurement!
9,5
9,5
Profile: Polyurethane *
Length: 530 mm
Stainless steel reinforcement
*t
Profile: Polyurethane *
Length: 3000 mm
Stainless steel reinforcement
Profile: Polyurethane *
Length: 3000 mm
Stainless steel reinforcement
Prompt delivery in strips
www.pei.it
49