D40A / G9SX-NS Compact Non-Contact Door Switch/Non-Contact Door Switch Controller0 pages

Compact Non-Contact Door Switch/Non-Contact Door Switch Controller
D40A/G9SX-NS
Electronic Detection Mechanism for
Better Stability in Non-contact Door
Switch Operation
Connection is also possible to a G9SP Safety Controller.
•Complies with ISO 13849-1(PLd/Safety Category 3).
•The maximum number of Switches that can be connected to a
G9SPseries Controller is given below.
G9SP-N10S: 15 × 1 system
G9SP-N10D/20S: 15 × 2 system
For details, refer to the G9SP Series Operation Manual (Cat. No.Z922).
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Be sure to read the “Safety Precautions” on page 28 and
the “Precautions for All Safety Door Switches”.
Features
● Easy-to-see 2-Color Indicators
● Mount from Either Side
Switch status is easy to see at a glance with
these red/yellow LED indicators.
Red:
Open door
detected.
Yellow:
Closed door
detected.
Not lit:
Power OFF
or failure
Swinging doors
● Small Actuator
Sliding doors
● Save Labor with Connector and Reduce Inventory
An actuator that is smaller than the switch
saves space, even inside the door.
Even when mounted with an L-bracket, the
actuator's height will not hinder installation or
operation.
Compact
Switch
Mount from whichever side provides the
easiest wiring path to enable mounting to all
types of doors.
Wiring time can be reduced with the connector.
Cable lengths can be selected, and only cables of
required lengths can be purchased.
Switches can be integrated into a single Switch
with a connector when installing in a machine with
multiple doors or various types of machines,
which can reduce inventory.
Actuator
● Connect Up to 30 Switches to a Single Controller
Reduce costs by connecting up to 30 Switches to a single Controller.
Up to 30 Switches
1