Model M1593A Maxiflex RIOc Link NIM0 pages

MAXIFLEX Remote I/O Link Module
Model M1593A Remote I/O Conet Link Network Interface Module

DATASHEET

FEATURES
•

Expand I/O to Maxiflex Systems to 1000 I/O

•

Connect Remote I/O to Maxiflex CPU’s up to 10km away

•

Implement Dual Redundant Control Systems

•

Connect up to 3 additional Remote Slave I/O Bases

The M1593A Remote I/O Conet Link (RIOc) Module
allows up to three Maxiflex remote I/O Bases to be
connected to a Maxiflex Master Base. The Remote I/O
Bases can be located in the same panel, or up to 10km
away.
The M1593A RIOc module fits into any I/O slot of a
Maxiflex Master Base, and connects to up to 3 Maxiflex
M1248A R2c Remote I/O Processors. Each Remote I/O
Processor can scan up to 15 I/O modules.
This Maxiflex RIOc Module is designed to operate in
conjunction with a Maxiflex T3 or P3 Maxiflex CPU
module in the Master System. The RIOc module scans

the I/O from the remote bases and transfers the I/O data
into the T3 or P3 CPU’s Data Interchange Table for
program or SCADA access.
The data link to the Maxiflex R2c modules operates on
the Conet data highway, providing an event-driven
token-passing ruggedised industrial network capable of
running up to 10km.
This allows remote I/O Bases to be placed in the same
panel as the Master Controller, or distributed across the
site.

APPLICATIONS

•

Create Maxiflex Systems larger than 15 I/O
modules using remote I/O Processors. Up to
three additional Maxiflex Bases can be
integrated as Remote I/O into a Master Maxiflex
System allowing systems up to 2000 I/O to be
created.

•

Construct dual redundant CPU applications with
shared I/O. By combining this Maxiflex RIOc
module with the Maxiflex P3-R or T3-R redundant
CPU’s, dual redundant CPU configurations can
be constructed with shared I/O.

Copyright Omniflex ♦ Subject to change without notice

Datasheet DSM1593AR02 sheet 1 of 4

http://www.omniflex.com

®