B12 Wet Gas Detector0 pages
Serie
sB12.
Wet Gas Transmitter.. ......
Accurate Gas Measurement
in Wet Gas Streams
Increasingly stringent air quality
sensor specifically engineered to
requirements have led to expanded
operate at 100% RH. Sensors are
use of wet scrubber systems to control
designed for direct insertion into vent
air emissions. Chlorine storage
stacks, or may be used in a flowcell if
facilities and chemical process plants
sample can be pumped to the sensor.
are frequently required to scrub
When remote display and alarm
exhaust gas streams to remove
relay functions are required, the B12
halogen and acid gases.
Wet Gas Transmitters can be
Unfortunately, monitoring reactive
connected to ATI's B14 Alarm Receiver
gas concentrations in moisture
System. This system will provide direct
saturated air streams presents
digital display of gas concentration,
problems for standard diffusion
plus 3 alarm setpoints, remote alarm
sensors. Condensing water in these air
reset input, and retransmitted 4-20
lines can quickly blind diffusion
mA output. Or, the B12 transmitter
sensors, rendering them inoperable.
may be used separately and tied
ATI’s Series B12 Wet Gas System
directly to the users' DCS, PLC, or
was developed to meet the need for
other equipment. Either way, the B12
reliable measurements in wet
is an excellent solution to a difficult
scrubber outlets for other gas streams
monitoring problem.
that might be saturated with water
vapor. Systems have been developed
for monitoring strong oxidants
(chlorine, bromine, chlorine dioxide,
or ozone), acid gases (HCl or HF), and
hydrogen.
The basic B12 Wet Gas System
consists of a loop-powered 2-wire
transmitter and a corrosion resistant
Take a look at
these features:
• Direct measuring sensor
• Minimal maintenance
• Rapid response
• Stack mount or flow-through
sensor
• Transmitter LCD display option
• Loop-powered electronics