Circular Adhesive Plates0 pages

Circular Adhesion Grips These grips come with a detachable upper and
lower circular plate made of hardened steel. Ball
socket mounting screws keep the top plate and
bottom plates parallel and perpendicular to the
applied force. >
Friction, Peel& AdhesionGrips

Capacity

2.5 kN, 562.5 lbf >

Packaging

Includes upper and lower grip. >

Applications

Used for general purpose adhesion testing. >

Shouldered Grip for Adhesive Tests This grip consists of 2 bobbin holders with a slot in the
shoulder to allow the bobbins to be easily inserted. The
adhesive to be tested is applied to the square surface
of the bobbins then the bobbins are held together until
the adhesive has set. The assembly is then slid into
the slots of each holder and the tensile test performed.
The grip is supplied complete with 6 bobbins so 3 tests
can be performed. After each test, the adhesive has to
be removed ready for the next test.The bobbins are
also suitable for sealants and mastics. >

Capacity

5 kN, 1124 lbf >

Packaging

Includes upper and lower bobbin holders and includes
six bobbins. >

Standards Applicable

Designed to meet ISO4624-1978 and BS3900:PartE10:1979 (pull off test for adhesion). >

Applications

Determining the adhesion of adhesives, sealants and
mastics by measuring the minimum tensile stress
necessary to detatch or rupture the coating. >
Note: See pages 93-113 for adapters required to fit grips to
force gauges, loadcells, and test stands.
Note: The GF-8 is supplied with the following adapters formounting to some force gauges, loadcells and test stands.Part NumberCoupling, 1/4-20Fx 5/16-18F17056
Coupling, 1/4-20Fx #10-32F17057
Adapter, 1/4-28 x 3/8-1621046-1
Adapter, #10-32 x 3/8-1621046-2See pages 93-113 for additional adapters required.

Ordering Information

ModelPart No.Description GF-8GF-8Circular Adhesion Testing Grips - 2.5 kN (562.5 lbf) TG13601/1584Shouldered Grip for Adhesive Tests - 5 kN (1124 lbf) >
www.lloyd-instruments.co.uk56 size="-2">