ElectroPuls E1000 Testing System0 pages

ElectroPuls™
E1000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E1000 is a state-of-the-art, all-electric test instrument designed for dynamic
and static testing on a wide range of materials and components. It includes Instron® advanced
digital control electronics, DynacellTM load cell, Console software, and the very latest in testing
technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead
lifts, a T-slot table for flexible test set ups, and a host of other user-orientated features. Powered
from a single-phase supply it requires no additional utilities for basic machine operation (for
example, pneumatic air, hydraulics, or water).
Features
• Patented, oil-free linear motor technology
t for clean conditions
• Designed for both dynamic and static
t testing on a variety of materials
t and components
• System status indicator shows system
t conditions (off, on, emergency stop,
t and fault)
Hidden Technology Designed
to Improve Your Test
• High dynamic performance, capable of
t operating at over 100 Hz
• Patented stiffness-based loop
t tuning system
• ±1000 N dynamic load capacity and
t ±710 N static load capacity
• Unique actuator bearing system
t maintains load string alignment when
t offset or lateral loads are induced by
t specimens or fixtures
• Temperature-controlled air-cooling system
• High-stiffness, precision-aligned twin
t column load frame with actuator in
t upper crosshead
• Versatile T-slot table for regular and
t irregular grips and specimens
• Compact instrument - frame requires less
t than 0.15 m² (1.6 ft²) of desk space
Hardware and Software
Interfaces Designed to Put
You in Control
• Console software control interface t engineered with Instron’s knowledge of
t machine usability
• Rigidly mounted control pod with
t critical controls and emergency stop at
t your fingertips
• Optional hardware panel for use when full
t computer functionality is not required
• Electrically powered crosshead lift system
t with manual lever clamps for ease of test
t space adjustment
www.instron.com
• An optical encoder for precise digital
t extension control and a dedicated
t position channel for set up and end
t of test
• Digital controller based on the industry’s
t most advanced controller
• Dynacell advanced load cell technology
t for faster testing and reduction of
t inertial errors
A High Level of Versatility
• Readily adjustable test space to suit a
t wide variety of specimens, grips, fixtures,
t and accessories
• 60 mm (2.36 in) stroke for a wide
t range of tests, as well as ease of
t specimen set up
• Offset diagonal coloumn configuration
t provides optimum access to the test area
• Compatible with WaveMatrixTM, Bluehill® 2
t and Application Specific software
• Compatible with a large range of grips,
t fixtures, chambers, saline baths, video
t extensometers, and other accessories
• Optional accessory kit to allow frame to
t be mounted in horizontal orientation for
t ease of testing with imaging systems
t and microscopes
Products for Materials Testing
• Electrically powered from single phase
t main supply, no need for hydraulic or
t pneumatic air supplies