FSTO Turbine Lube Oil Varnish Removal0 pages

HY-PRO FILTRATION

FSTO - Small turbine & Compressor Lube Oil

FSTO Turbine Lube Oil Varnish Removal
Ideal for maintenance of small turbine lube oil & compressor reservoirs

Prevent varnish related servo valve failures
on small gas turbines and compressor lube oil
applications (ie gas transmission compressor units)
Remove & prevent varnish deposits with ICB
element technology (Ion Charge Bonding)
Achieve & maintain MPC value < 20 (lower varnish
potential)
Lower ISO codes to 14/12/9 with high efficiency
post filter element
Extend life of anti-oxidant additives & prevent
premature oil replacement

ICB & VTM, the 1, 2 varnish removal punch High Contamination Fluid Recovery
ICB removes the soluble varnishing building
oxidation by-products at the molecular level
reversing the process of varnish deposits while VTM
removes the gross insoluble by-products for a more
rapid reduction in varnish potential.

Fluid Compatibility

Mineral based turbine oils and specified synthetic
Fluids with R&O additive package (non-zinc AW).
NOT for use on AW type hydraulic oils, contact HyPro for fluid compatibility & selection.

For systems with high acid number, excessive gel / sludge
buildup or extremely high water contact Hy-Pro for rapid fluid
recovery solutions.

Fluid Condition Based Solutions

From a sample of in-service oil and system details we will help
you specify and implement a fluid contamination solution to
achieve reliable operation and extend useful fluid life.
We know how to stop lube oil varnish before it stops you!

Suitable Operating Temperature Range

90°F/32°C (minimum) to 160°F/71°C (maximum)
Operating below minimum can result in reduced acid
and metal ion removal efficiency
Warning: Do not operate above max temperature
160°F/71°C. Contact factory to add pre-cooler
before ICB media (operating temp required).

www.hyprofiltration.com