i-Lift/Hu-Lift Hydraulic Jacks HM0 pages
ALIFTEQUIP
Hydraulic Jack HM series
i-LIFT hydraulic jacks for repairs, maintenance and installation of heavy machines
Compact and stable construction.
Can be used in any position.
Housing revolves 360 degrees.
a Lowering speed can be accurately adjusted.
Protected against overloading.
Pump lever is removable.
According to CE and US standard USA ASME/ANSI B30.1.1986.
HM50
HM100
HM250
CAUTIONS
To avoid possible personal injury or damage to equipment
Do not exceed the maximum load capacity of the jack.
Do not add additional load to a lifted load.
Do not use in unstable or hazardous positions.
Unit must be used on flat surfaces able to carry the load.
The load must be stable during lifting.
An unstable load may cause the jack or load to slip.
Do not use jack(s) if damaged, altered or in poor condition.
Do not lift people or loads with people on them.
Do not lift at the end of the toe.Fully engage the load with the toe.
i-Lift No. | 2311101 | 2311102 | 2311103 |
Type | HM50 | HM100 | HM250 |
Capacity (tonne) | 5 | 10 | 25 |
Lifting Range of Foot (mm) | 25-230 | 30-260 | 58-273 |
Lifting Range of Head (mm) | 368-573 | 420-650 | 505-720 |
Max. Lever Force (k9) | 38 | 40 | |
Net Weight (kg) | 25 | 35 | 102 |
205
"