HIBC/B Intermidiate Bulk Container Heater0 pages

Technical Datasheet

Type HIBC/B Container Heaters
Applications:
The HIBC/B container heater is designed to heat products stored
in 1000 litre intermediate bulk containers.
The HIBC/B is an insulated heater jacket, which covers all four
sides of the IBC and has an optional insulated lid.

Construction:

l Teflon/Polyester Jacket
l Dual Power Circuits

The heating element of the HIBC/B container heater is stiched
into an insulated jacket made from a water resistant,
Teflon/Polyester material, insulated with a stitched blanket of
needled silica glass complete with quick release buckles for ease
of installation and removal. The heating element is shielded with
a tinned copper earth braid for safety.
All HIBC/B container heaters are supplied with 4 metres of
braided power cable and fitted with either a 0 to +40°C or
0 to +90°C capillary thermostat. Available on 2 circuits each
1000 watts, 110 volts or 230 volts AC.

l Thermally Insulated

Jacket Material: Heated Face - Polyester base fabric. Teflon
coated. Outer face - 1100 deitex texturised
Nylon polyurethane coated

l 0 to 40°C or 0 to 90°C Thermostat

Insulation:

Glass filament blanket

Element:

Silicone insulated spiral wound resistance
element

Control:

0 to +40° or 0 to +90°C Adjustable thermostat

Power Cable:

4 Metre HO7RN-F

Fixing:

Nylon webbing with quick release
adjustable buckles

l Adjustable Quick Release Buckles
l Bespoke Sizes to Order
l 4 Metre Power Cable
l IP40 Protection

Holroyd Components Ltd.
Shire Hill Industrial Estate,
Saffron Walden, Essex
CB11 3AQ United Kingdom
Tel: +44 (0) 1799 523177
Fax: +44 (0) 1799 513714
sales@holroydcomponents.com
www.holroydcomponents.com

UL and VDE approved manufacturing facilities

Health and Safety:
All HIBC container heaters are manufactured
to conform to the EEC low voltage and EMC
directives and CE marked accordingly. It is advised that power to
the heater jacket be disconnected when the container is either empty
or being filled, or upon installation or removal of the heater itself. It
is recommended that the unit be operated in a dry environment with
the container vented to avoid build up of internal pressure.

www.holroydcomponents.com