Fact Sheet

PRO E-Cell* Series
Integrated RO/EDI Machines 50 to 200 gpm 60 Hz
Accessories

Features

RO and EDI mounted on common skid
PRO E-Cell* 50 and 100 are 2 pass RO designs
PRO E-Cell 150 and 200 are 1 pass RO designs
RO Pump VFD(s) and EDI DC Drive mounted on
skid
RO permeate flush sequence on shutdown and
divert to drain on startup
Allen Bradley control system with Compact
Logix PLC and PanelView Plus 1000 interface
UL/cUL Electrical Panel

Instrumentation
Flow Meters....................RO Permeate, RO Concentrate
EDI Product, EDI Concentrate, EDI Electrode
Pressure Gauge..................... Pre & Post Cartridge Filter
Primary, Final, Interstage, RO Permeate,
RO Concentrate, RO Pump Discharge,
Pressure Switch............................ RO Feed, RO Permeate
RO Concentrate
Pressure Transmitter ..................... RO Primary, RO Final
RO Permeate, EDI Product, EDI Concentrate,
EDI Electrode, EDI Dilute Feed
pH Meter ......................................................... RO Feed pass 1
(also pass 2 for 50-100 model)
ORP (Optional) ............................................... RO Feed pass1

PRO Multi-Media filters
PRO Activated Carbon and Softeners
PRO Clean-in-Place units
PRO Chemical Feed Systems
Transfer Pumps and Storage Tanks

Operating Parameters
Design Recovery RO1 ............ 75% Pass 1; 85% Pass 2
Design Recovery EDI ................................................. 90-95%
Design Temperature .......................................... 60ºF (16ºC)
Operating Temperature Range ........ 40-85ºF (5-29ºC)
System Inlet Pressure ........................ 30-60 PSI (2-4 Bar)
1Recovery

Rate can vary +/- 5%

Materials of Construction
High-pressure piping ....... 316 Stainless Steel, Sch. 10
Low-pressure RO & EDI piping ....................PVC, Sch. 80
Frame ...................................... Epoxy-coated carbon steel
Enclosure ............................................ Nema 4 carbon steel
Clamps/fittings .................................................... Zinc-plated

Membrane Elements and Housings
Model (50-100) GE ....................................................... AK-400
Model (150-200) ........................ GE PRO-RO-400-HR-WT
Average membrane flux (50-100)......... 12 GFD pass 1
21 GFD pass 2
Average membrane flux (150-200) ..................... 14 GFD
Membrane rejection..................................... 99.0 to 99.5%
Housing material ................................................... Fiberglass
Housing Pressure Rating ....................................... 450 psi

Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
AM-FSroPRO_E-Cell_EN.doc Sep-13