KENTIE Linear Ball Bearings for 3D Printer - RoHS0 pages
Address: Huatai Technology Park, Xiegang Town, Dongguan, Guangdong, China
Tel: 86-0769-81909138 Fax: 86-0769-81909108
LINEAR ROLLER BEARING SERIES
J..
■"in
-+■4-
X..J
5j?gfnSF5(BiB37DSii^s5aB3ffljg„ &mmmm&mtmmams\mwmmi}\. msnm
ffi5ji>AHQiiasi(s??j5K, ?sseHuisffiSo B^mmmfnmmm, mkmrnmrnmcom
Linear roller bearings are suitable in conjunction with guide ways for locating and non-locating
bearing arrangements and form a bearing arrangement system for linear motion with unlimited
stroke length. In closed arrangements, they can support loads from all directions and moments
about all axes. Their load carrying capacity is extremely high and the space required is very small.
The guidance systems can be preloaded by adjusting gibs and have extremely high rigidity when
preloaded. Since the guidance elements have a versatile range of possible arrangements, linear
recirculating roller guidance systems are suitable for numerous applications in general machine
building, especially for linear guidance systems in machine tools where high guidance and
positioning accuracies are required over long traverse distances.
MODEL NO. | mm NUMBER OF BALL | tSR-taSS MAIN DIMENSIONS(mm) | SfiMB (|im) | BASIC LOAD RATING | = | |||||||||
INSCRIBED CIRCLE | OUTER DIAMETER | LENGTH | OUT LOCKING GROOVE | w | RADIAL CLEARANCE | C(«gf) | Colkgf | |||||||
dr | D | TOLERANCE | L | TOLERANCE | B | TOLERANCE | D1 | Mix | ||||||
LM4UU | 4 | 4 | 8 | 0.-11 | 12 | O.'-O 2 | O.'-O 2 | -5 | 9 | 13 | 1.9 | |||
LM5UU | 4 | 5 | 10 | 0/-11 | 15 | 0/-0.2 | 10 2 | 0/-0.2 | 9.6 | 1.1 | -5 | 17 | 21 | 4 |
LM6UU | 4 | 6 | 12 | 0/-11 | 19 | 0/-0.2 | 13 5 | 0/-0.2 | 11.5 | 1.1 | -5 | 21 | 27 | 7.6 |
J.18SUU | 4 | 8 | 15 | 0/-11 | 17 | 0/-0.2 | 11.5 | 0/-0.2 | 14.3 | 1.1 | -5 | 18 | 23 | 10.4 |
LM8UU | 4 | 8 | 15 | 0/-11 | 24 | 0/-0.2 | 17 5 | 0/-0.2 | 14.3 | 1 1 | -5 | 27 | 41 | 15 |
LM10UU | 4 | 10 | 19 | 0/-13 | 29 | O.'-O 2 | 22 | O.'-O.2 | 18 | 1.3 | -5 | 38 | 56 | 29.5 |
LM12UU | 4 | 12 | 21 | 0/-13 | 30 | 0/-0.2 | 23 | 0/-0.2 | 20 | 1.3 | -5 | 42 | 61 | 31.5 |
LM13UU | 4 | 13 | 23 | 0/-13 | 32 | 0/-0 2 | 23 | O'-O 2 | 22 | 1.3 | -7 | 52 | 79 | 43 |
LM16UU | 5 | 16 | 28 | 0/-13 | 37 | 0/-0.2 | 26 5 | 0/-0.2 | 27 | 1.6 | -7 | 79 | 120 | 69 |
LM20UL | 5 | 20 | 32 | 0i 16 | 42 | 0 • 0 2 | 30 5 | D' 0 2 | 30 5 | 1 6 | -9 | 88 | 140 | ■37 |
LM25UU | 6 | 25 | 40 | 0/-16 | 59 | 0/-0.2 | 41 | 0/-0.2 | 38 | 1.9 | -9 | 100 | 160 | 220 |
LM30UU | 6 | 30 | 45 | 0/-16 | 64 | 0/-0.3 | 44 5 | 0/-0.3 | 43 | 1.9 | -9 | 160 | 280 | 250 |
LM35UU | 6 | 35 | 52 | 0/-19 | 70 | 0/-0.3 | 49 5 | 0/-0.3 | 49 | 2.1 | -13 | 170 | 320 | 390 |
LM40UU | 6 | 40 | 60 | 0/-19 | 80 | 0/-0.3 | 60 5 | 0/-0.3 | 57 | 2 1 | -13 | 220 | 410 | 585 |
LM50UU | 6 | 50 | 80 | 0/-19 | 100 | 0/-0.3 | 74 | 0/-0.3 | 76.5 | 2.6 | -13 | 390 | 810 | 1580 |
LM60UU | 6 | 60 | 90 | -0 022 | 110 | 0/-0 3 | 85 | 0/-0.3 | 86.5 | 3.2 | -16 | 480 | 1020 | 1860 |
55
511 THRUST BEARING SERIES
m m |
»rsTrace i2BiSt+iimfflTiSffls*isii„ Ji7DHisa*s«0iL'AS55a@ig. mats
Thrust ball bearings comprise shaft locating washers, housing locating washers and ball and
cage assemblies. The bearings are not self-retaining; the ball and cage assembly and bearing
washers can therefore be fitted independently of each other. In addition to series with flat washers,
there are also series with spherical housing locating washers for compensation of static
misalignment. These designs are normally used in conjunction with support washers. Thrust ball
bearings are available in single and double direction designs. Both designs can support high axial
forces, but must not be subjected to radial loads.
Bearing No. | Main Dimension | Load Rating | tSKUtiS Speed Rating | SB Weight | |||||
d | D | B | Dynamic | Static | Reference | Limiting Speed | |||
Cr | Cor | Speed | |||||||
mm | r/min | kfl | |||||||
51100 | 10 | 24 | 9 | 9. 95 | 15, 3 | 9500 | 13000 | 0. 020 | |
51101 | 12 | 26 | 9 | 10, 4 | 16,6 | 9000 | 13000 | 0. 022 | |
51102 | 15 | 28 | 9 | 10, 6 | 18, 3 | 8500 | 12000 | 0. 024 | |
51103 | 17 | 30 | 9 | 11.4 | 21,2 | 8500 | 12000 | 0. 026 | |
51104 | 20 | 35 | 10 | 15, 1 | 29 | 7500 | 10000 | 0. 039 | |
51105 | 25 | 42 | 11 | 18, 2 | 39 | 6300 | 9000 | 0. 060 | |
51106 | 30 | 47 | 11 | 19 | 43 | 6000 | 8500 | 0. 069 | |
51107 | 35 | 52 | 12 | 19, 9 | 51 | 5600 | 7500 | 0. 080 | |
51108 | 40 | 60 | 13 | 26 | 63 | 5000 | 7000 | 0. 12 | |
51109 | 45 | 65 | 14 | 26, 5 | 69, 5 | 4500 | 6300 | 0. 15 | |
51110 | 50 | 70 | 14 | 27 | 75 | 4300 | 6300 | 0. 16 | |
51111 | 55 | 78 | 16 | 30, 7 | 85 | 3800 | 5300 | 0. 24 | |
51112 | 60 | 85 | 17 | 41, 6 | 122 | 3600 | 5000 | 0. 30 | |
51204 | 20 | 40 | 14 | 17.16 | 30.01 | 4500 | 6000 | 0.075 | |
51205 | 25 | 47 | 15 | 21.38 | 40.14 | 4000 | 5300 | 0.105 | |
51206 | 30 | 52 | 16 | 21.65 | 43.23 | 3600 | 4800 | 0.128 | |
51207 | 35 | 60 | 18 | 30.12 | 62.24 | 3000 | 4000 | 0.209 | |
51208 | 40 | 68 | 19 | 36.15 | 78.26 | 2800 | 3800 | 0.258 | |
51209 | 45 | 73 | 20 | 36.73 | 83.19 | 2600 | 3600 | 0.3 | |
51210 | 50 | 78 | 22 | 37.34 | 88.54 | 2400 | 3400 | 0.366 | |
51211 | 55 | 90 | 25 | 52.04 | 126.09 | 1900 | 2800 | 0.584 | |
51212 | 60 | 95 | 26 | 56.03 | 142.26 | 1900 | 2600 | 0.662 | |
51213 | 65 | 100 | 27 | 57,61 | 150.16 | 1800 | 2600 | 0.738 | |
51214 | 70 | 105 | 27 | 56.61 | 150.16 | 1800 | 2600 | 0.774 |
KENTIE BEARING
56
"