Apollo 2002 MATERIAL SAFETY DATA SHEET0 pages

Cyberbond
Apollo
2002

MATERIAL SAFETY DATA SHEET

Cyberbond LLC
401 N Raddant Road, Batavia, IL 60510
630.761.8900 tel
630.761.8989 fax
www.cyberbond1.com

1 - Chemical Product and Company Identification
Product Name
Date Revised

Apollo 2002
1/3/2012

Product Type
Emergency Number

Cyanoacrylate Ester
800-535-5053

2 - Composition/Information on Ingredients
CAS Number

Hazardous Component

Ethyl-2 Cyanoacrylate
Poly Methyl Methacrylate
Exposure Limits (TWA)

%

7085-85-0
9011-14-7

80-95
5-10

ACGIH (TLV)

Ethyl-2 Cyanoacrylate

OSHA (PEL)

OTHER

.2 ppm

None

None

3 - Hazards Identification
Potential Health Effects
Inhalation:

Exposure to vapors above the established exposure limit results in respiratory irritation which may lead to
difficulty breathing and tightness in the chest.

Skin Contact:

Bonds to skin in seconds. May cause skin irritation. Cyanoacrylates have been reported to cause allergic
reaction but due to rapid polymerization at the skin surface, an allergic response is rare. Cyanoacrylates
generate heat during the cure process and in rare instances a large drop can burn the skin.

Eye Contact:
Ingestion:

Irritating to eyes. Can cause excessive tearing. Eyelids may bond.
Material is not harmful if ingested.

4 - First Aid Measures
Inhalation:
Skin Contact:
Eye Contact:
Ingestion:

Remove to fresh air. If symptoms persist, obtain medical attention.
Soak in warm water. Do not pull skin apart. See supplemental section for emergency action.
Flush with warm water. If eyelids are bonded closed, release eyelashes with water by covering the eye with a
wet pad. Do not force eye open. See supplemental section for emergency action.
Ingestion is unlikely. See supplemental section for emergency action.

5 - Fire Fighting Measures
Flash Point:
Extinguishing Media:

87°C, 189°F Tag Closed Cup
Foam, Dry Chemical or Carbon Dioxide

Unusual Fire or
Explosion Hazards:

None.

Special Fire Fighting
Procedures:

Wear self-contained breathing apparatus

Hazardous
Combustion Products:

Trace amounts of toxic and/or irritating fumes may be released and the use of breathing apparatus is
recommended.

6 - Accidental Release Measures
Steps to be taken in
case of spill or leak:

Do not use cloths for clean-up. Flood spilled material with water to polymerize. Cured material can be scraped
up and disposed of as non-hazardous waste. Make sure spill area is well ventilated.

Page 1 of 3

Cyberbond LLC...
630.761.8900...