R28100 pages

INFRAcheck Type R2810
Product information and Operating instructions
INFRAcheck is a high precision instrument that allows an easy and
quickly on site check of your pyrometer.
A highly precise, long term stable control system guarantees a
control accuracy for the radiation source of ±2 °C.
The emittance of the target area is nearly 1.
Thus you are able:
– exactly to check the long term stability resp. the performance of
your pyrometer or your infrared camera,
– to recognize changes to measurement characteristics caused
e.g. by soiled optics,
– to recognize faults in post-processing (indication, process control
system).

Application
Because the conditions of assembling, surrounding and pyrometer settings are not always ideal, you should
proceed as follows:
Having installed the pyrometer at the measuring point and adjusted the emittance to suit the measurement duty,
take a reference measurement with INFRAcheck. Note the measured value. Take reference measurements in
regular intervals and compare the measurement with the first measurement. If the deviation is greater than the
allowed inaccuracy of your measuring system, a fault has occurred or the gage length is soiled.

Operation
Connect the connection cable of the power supply unit to the socket at the INFRAcheck and connect the power
sypply unit to a mains socket (AC 230 V).
5 minutes after the LED switches from red to green the specified temperature is reached with a tolerance of
±0,4 °C.
For the different types of pyrometers are matching adapters available. Attach INFRAcheck always with the
matching adapter to the pyrometer.
The pyrometer should display the temperature, that is specified at the INFRAcheck.

Pyrometer

INFRAcheck

Adapter

Power supply unit

BARTEC Componenten und Systeme GmbH ! Schulstraße 30 ! D-94239 Gotteszell ! Telefon +49(0)9929 301-0 ! +49(0)9929 301-112